• Size: 24 x 10 x 12 mm
• Weight: 0.34 oz
• Gear ratio: 100:1
• Free-run speed @ 6V:120 rpm
• Free-run current @ 6V:40 mA
• Stall current @ 6V: 360 mA
• Torque @ 6V:10 oz·in

The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use our mounting bracket or extended mounting bracket, which are specifically designed to securely mount the gearmotor while enclosing the exposed gears. We recommend the extended mounting bracket for wheels with recessed hubs.

These motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.