- Socket for LPCXpresso and mbed module
- 50 pin expansion dual row pin list connector (male, 100mil pitch) for simple connection external designs and to a logic analyzer
- 50 pin expansion dual row header connector (female, 100mil pitch) for simple connection to breadboard
- Battery powering (small coin battery)
- USB interface
- Reset pushbutton
Digital IO:
- RGB-LED (can be PWM controlled)
- 5-key joystick switch
- 2 pushbuttons, one for activating bootloader
- Rotary switch with quadrature encoding (timer capture)
- Temperature sensor with PWM output (timer capture)
Analog IO:
- Trimming potentiometer input (analog input)
- PWM to analog LP-filtering (PWM output and analog input)
- Speaker output (PWM output)
- Oscilloscope probe inout stage
Serial bus - SPI:
- Shift register driving 7-segment LED
- SD/MMC memory card interface
- Dataflash SPI-NOR flash
Serial bus - I2C:
- PCA9532 port expander connected to 16 LEDs
- 8kbit E2PROM
- MMA7455L accelerometer with I2C interface
- Light sensor
Serial bus - I2C/SPI shared:
- SC16IS752 - I2C/SPI to 2xUART bridge; connected to RS232 full-modem interface and one expansion UART
- 96x64 pixel white OLED (alternative I2C/SPI interface)
Serial bus - UART:
- USB-to-serial bridge, with automatic ISP activation
- RS422/485 interface
- Interface socket for XBee RF-module
Specific mbed module support:
- CAN bus interface (can be simulated with LPCXpresso)
- Ethernet RJ45 connector with integrated magnetic
Dimensions: 150 x 180 mm
Power: via USB (+5V)
Products
