|
This is a starter kit which allows you to explore all the capabilities of PIC18F4550 and the Microchip's USB firmware. The software examples include: USB HID mouse which allows you to move the mouse cursor with the four buttons on the board, the USB Mass storage device on a SD-MMC card simple adds USB disk to your computer, and a USB to RS232 converter - all the firmware under your control and ready to be customized and embedded in your next application. The debugging is In-Circuit through ICSP connector, the free available ports are available on the EXTension connector.
Features
- ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-PG1,PIC-PG2, PIC-PG3 or PIC-PG4 and programming and debugging with PIC-ICD2, PIC-ICD2-POCKET and PIC-ICD2-TINY
- USB 2.0 type B connector allow board to be interfaced to PC host
- RS232 connector
- SD-MMC connector
- Audio In, Audio Out connectors
- Status LEDs
- Trimmer potentiometer
- Four buttons
- PIC18F4550-I/P on DIL40 socket
- 20Mhz Quartz crystal
- Reset button
- Power plug-in jack with diode bridge : can be powered with AC or DC power supply
- 5V voltage regulator
- Extension slot for the free ports
- Four mounting holes 3,3 mm (0,13")
- FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- Dimensions 104x76 mm
Resources
Hardware
Software
- USB bootloader (C source and HEX)
- HID Mouse demo (C source and HEX)
- Mass Storage device (C source and HEX)
- USB RS232 converter (C source and HEX)
- PIC-USB-STK demo code (C source and HEX)
- PIC-USB-STK audio (pitch shift) demo provided by Alexander Boltik LINK (for more info refer to the readme.txt in the package)
|
Products
