This is a kit of 4x4x4 RGB LEDs cube, containing 648mm RGB LEDs, custom PCBs and all supporting components (6 free alternate LEDs are included in the kit). All parts are well packed in a nice package.

The built kit allows all sorts of crazy 3d light patterns to be created, in pretty much any colour.

It's important to understand that this kit contains only the LED cube parts, *not* the microcontroller board and LED current drivers. The kit is designed to work directly with the Rainbowduino. The Rainbowduino includes already all necessary drivers and connections and can be directly attached at the bottom of the Rainbowcube. Also - no PSU is supplied, but any 9V supply with the correct barrel connector should work.

Once assembled, you can control all LEDs of the Rainbowcube either by changing the Arduino program itself or by using the easy to use control software.

You do need some basic soldering skill to make this kit.

• 8mm RGB LED x70
• Cube Panel X1
• Slim Panel PCB X4
• Side A slim PCB X4
• Side B slim PCB X4
• 2.54mm 40pin male header X5
• 2.54mm 40pin female header X2
• 2.54mm 16pin female header X3
• 2.0mm 10pin female header X2
• 8pin female header X5
• 2X3 female header X1
• JST power cable X1
• 3.5mm 4pin green terminal X1
• 3.5mm DC jack X1
• 3mm LED red X1
• 3mm LED green X1
• 1K 1/8w resistor X4
• 10k 1/8w resistor X1
• 15k 1/8w resistor X1
• linear voltage regulator X1
• 10uF_16v_E-CAP X2

• Assembly instruction
• Rainbowduino