Filters
Audio
Looking for something new for an audio project? Trigger your music files with an MP3 or WAV Trigger, add amazing visualisations to your musical projects with a music visualizer, amp up the volume with an audio amplifiers or just output your sound by adding a speaker, with our huge range of products for use in audio circuits.
-
MP3 Player Shield (DEV-12660)
SparkFun£30.32 inc VAT
£25.27 ex VATDESCRIPTION This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functio...
View full details£30.32 inc VAT
£25.27 ex VATSale -
Amplified Speaker
Monk Makes£10.37 inc VAT
£8.64 ex VATDESCRIPTION The MonkMakes Powered Speaker is an easy to use amplified speaker on a PCB. The board needs a 5V power supply that can be provided by e...
View full details£10.37 inc VAT
£8.64 ex VATSold out -
I2S Audio Breakout - MAX98357A
SparkFun£5.58 inc VAT
£4.65 ex VATDESCRIPTION The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analogue converter (DAC), which converts I2S (not to be confused wi...
View full details£5.58 inc VAT
£4.65 ex VATSale -
Surface Transducer - Small
Generic / OEM£11.34 inc VAT
£9.45 ex VATDESCRIPTION Surface transducers give you the awesome power to turn almost any surface into a speaker. Much like our larger surface transducer, this...
View full details£11.34 inc VAT
£9.45 ex VATSold out -
MIDI Shield Kit (DEV-12898)
SparkFunOriginal Price £26.11 inc VATCurrent Price £20.32 inc VAT
£16.93 ex VATDESCRIPTION The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencer...
View full detailsOriginal Price £26.11 inc VATCurrent Price £20.32 inc VAT
£16.93 ex VATSave 22% -
Audio Jack Breakout (PRT-10588)
SparkFunOriginal Price £0.79 inc VATCurrent Price £0.62 inc VAT
£0.52 ex VATDESCRIPTION Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common...
View full detailsOriginal Price £0.79 inc VATCurrent Price £0.62 inc VAT
£0.52 ex VATSave 22% -
Grove - Speaker
Seeed Studio£6.99 inc VAT
£5.83 ex VATDESCRIPTION The Grove - Speaker is a module consisting of power amplification and voice outputs. The loudness can be adjusted by the onboard potent...
View full details£6.99 inc VAT
£5.83 ex VATSold out -
Grove - Buzzer
Seeed Studio£1.99 inc VAT
£1.66 ex VATDESCRIPTION This is a simple yet enjoyable buzzer to use. It can be connected to digital outputs and will emit a tone when the output is high. Alte...
View full details£1.99 inc VAT
£1.66 ex VATSold out -
Raspberry Pi IQaudio DAC+
Raspberry Pi£19.79 inc VAT
£16.49 ex VATDESCRIPTION DAC+ is an audio output HAT for all generations of Raspberry Pi from the Raspberry Pi 1 Model B+ onwards, and supports 24‑bit 192kHz h...
View full details£19.79 inc VAT
£16.49 ex VATSold out -
Raspberry Pi IQaudio DigiAMP+
Raspberry Pi£29.39 inc VAT
£24.49 ex VATDESCRIPTION DigiAMP+ uses the TAS5756M PowerDAC to deliver the direct connection to PASSIVE stereo speakers at up to 2x35wpc with variable output. ...
View full details£29.39 inc VAT
£24.49 ex VATSold out -
PDM MEMS Microphone Breakout (ID: 2453)
Adafruit£7.00 inc VAT
£5.83 ex VATDESCRIPTION An exotic new microphone has arrived, a PDM MEMS Microphone! PDM is the 'third' kind of microphone you can integrate with electronics, ...
View full details£7.00 inc VAT
£5.83 ex VATSale -
66mm 64ohm Speaker
Generic / OEM£1.79 inc VAT
£1.49 ex VATDESCRIPTION This is a 66mm diameter, 64ohm speaker with a power rating of 0.3W.
£1.79 inc VAT
£1.49 ex VATSold out -
Audio Hacker Shield - Kit
Nootropic Design£28.00 inc VAT
£23.33 ex VATDESCRIPTION The Audio Hacker shield for Arduino allows you to perform realtime digital signal processing. Record audio samples into memory and play...
View full details£28.00 inc VAT
£23.33 ex VATSold out -
Si4703 FM Tuner Basic Breakout (BOB-11083)
SparkFun£12.32 inc VAT
£10.27 ex VATDESCRIPTION This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than the FM Tuner Evaluation Board. If y...
View full details£12.32 inc VAT
£10.27 ex VATSale -
3.5mm Stereo Audio & Video Cable for Raspberry Pi - 1m
Generic / OEMOriginal Price £1.92 inc VATCurrent Price £0.59 inc VAT
£0.49 ex VATDESCRIPTION This is a 1 meter, 4 ring, 3.5mm audio/video jack cable for use with the Raspberry Pi. This quality audio and video cable is compatible...
View full detailsOriginal Price £1.92 inc VATCurrent Price £0.59 inc VAT
£0.49 ex VATSave 69% -
Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit (ID: 3346)
Adafruit£13.99 inc VAT
£11.66 ex VATDESCRIPTION Turn up that Raspberry Pi mix to the max with this 3W Stereo Amplifier Bonnet for Raspberry Pi. It's the exact same size as a Raspberry...
View full details£13.99 inc VAT
£11.66 ex VATSale -
Noise Pack for Kitronik Inventor's Kit for the BBC micro:bit
KitronikOriginal Price £13.79 inc VATCurrent Price £10.48 inc VAT
£8.73 ex VATDESCRIPTION Learn how to bend sound to your will with the Noise Pack add-on for the Kitronik Inventors Kit for the BBC micro:bit. The pack, in conj...
View full detailsOriginal Price £13.79 inc VATCurrent Price £10.48 inc VAT
£8.73 ex VATSave 24% -
Amplified Speaker Kit for Raspberry Pi
Monk Makes£16.49 inc VAT
£13.74 ex VATDESCRIPTION Give your next project a musical twist with this brilliant little amplified speaker kit for Raspberry Pi. Please Note: Raspberry Pi n...
View full details£16.49 inc VAT
£13.74 ex VATSold out -
LilyPad MP3 (DEV-11013)
SparkFun£46.81 inc VAT
£39.01 ex VATDESCRIPTION The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats...
View full details£46.81 inc VAT
£39.01 ex VATSale -
:KLEF Piano for the BBC micro:bit
Kitronik£19.48 inc VAT
£16.23 ex VATDESCRIPTION Compose a monophonic micro:bit musical masterpiece with the Kitronik :KLEF Piano for the BBC micro:bit. It features 15 capacitive touch...
View full details£19.48 inc VAT
£16.23 ex VATSold out -
ReSpeaker 4-Mic Array for Raspberry Pi
Seeed Studio£19.99 inc VAT
£16.66 ex VATDESCRIPTION The ReSpeaker 4-Mic Array for Raspberry Pi is a quad-microphone expansion board for Raspberry Pi, designed for use with AI and voice ap...
View full details£19.99 inc VAT
£16.66 ex VATSold out -
Thin Speaker - 4 Ohm, 2.5W, 28mm
Sparkfun Electronics£1.99 inc VAT
£1.66 ex VATDESCRIPTION If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 2.5W, 4 Ohm speaker ...
View full details£1.99 inc VAT
£1.66 ex VATSale -
DJ Shield Standard - Kit
Nootropic Design£16.00 inc VAT
£13.33 ex VATDESCRIPTION The DJ Shield shield for Arduino gives you 5 high-quality buttons and three 10K linear potentiometers to provide input to your projects...
View full details£16.00 inc VAT
£13.33 ex VATSold out -
Speaker for micro:bit
Monk Makes£8.99 inc VAT
£7.49 ex VATDESCRIPTION The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to your micro:bit using alligator clips. Despite i...
View full details£8.99 inc VAT
£7.49 ex VATSold out