Or : Contact Us...

 

By email :

  • For sales enquiries please use sales @ coolcomponents.co.uk
  • For technical enquiries please use tech @ coolcomponents.co.uk

By Zendesk Support Ticket :

If you'd like to open a support ticket through the Zendesk system, please click here, or point your browser to http://coolcomponents.zendesk.com

Via Facebook :

Our Facebook page is a great place to ask a question quickly and easily.

Via Twitter :

Contact us via Twitter if your question is 140 characters or less, you can just fire off a direct message to us, or even just do an @ mention.

By phone :

If you have a more urgent request (no phone orders please!) you can telephone us on 0871 288 7685. Phone lines are open from 10am to 5pm UK time.

Our address :

Thinking of visiting us for an order collection? (please no visits without an appointment!). Our address :

Cool Components Ltd,Unit 208, 250 York Road,London,SW113SJ,United Kingdom

Cool Components Location Map
View our location in a larger map

Items 1 to 10 of 211 total

per page

Grid  List 

Set Descending Direction
  1. NEW
    Raspberry Pi 3 Model B + 16GB SD Card with NOOBS OS

    Raspberry Pi 3 Model B + 16GB SD Card with NOOBS OS

    Excl. Tax: £37.49 Incl. Tax: £44.99

    This is the Raspberry Pi 3 (Model B) single board computer. This bundle comes with a 16GB class 10 microSD card that is pre installed with NOOBS operating system and an adapter for SD card.

    Learn More
  2. NEW
    Wireless Joystick Kit

    Wireless Joystick Kit

    Incl. Tax: £31.78 Excl. Tax: £26.48

    The SparkFun Wireless Joystick Kit provides an easy way to control your next XBee project. Before the wireless joystick, radio-controlled projects used hobby RC transmitters, the same ones used for RC cars, boats and planes. The problem with these transmitters is that many aren’t customizable, and the ones that tend to be too expensive for many of us. The Wireless Joystick Kit offers a custom wireless solution for those who want to control their project their own way.

    Learn More
  3. NEW
    Ultrasonic Proximity Sensor MB1001 ParkSonar EZ-72

    Ultrasonic Proximity Sensor MB1001 ParkSonar EZ-72

    Incl. Tax: £27.23 Excl. Tax: £22.69

    This ultrasonic proximity sensor MB1001 ParkSonar EZ-72 is suited for use in vehicles to detect the distance from an object. It has a maximum range of 6.45m with a resolution of 1 inch.

    Learn More
  4. NEW
    Pro Micro - 3.3V/8MHz

    Pro Micro - 3.3V/8MHz

    Incl. Tax: £18.43 Excl. Tax: £15.36

    The Pro Micro 3.3V/8MHz is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.

    Learn More
  5. TFT FeatherWing - 2.4" 320x240 Touchscreen

    TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers

    Incl. Tax: £29.74 Excl. Tax: £24.78

    Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED backlight. You get 240x320 pixels with individual 16-bit colour pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display comes with a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

    Learn More
  6. NEW
    MB7950 Mounting Hardware for Outdoor Ultrasonic Sensors

    MB7950 Mounting Hardware for Outdoor Ultrasonic Sensors

    Incl. Tax: £3.83 Excl. Tax: £3.19

    The MB7950 Mounting Hardware is selected for use with outdoor ultrasonic sensors by Maxbotics. The MB7950 mounting hardware gives you easy access to the hardware needed for through hole mounting. The mounting hardware includes a steel lock nut and two O-ring (Buna-N and Neoprene) each optimal for different applications.

    Learn More
  7. NEW
    Triple Axis Accelerometer Breakout - LIS3DH diagonal view

    Triple Axis Accelerometer Breakout - LIS3DH

    Incl. Tax: £4.94 Excl. Tax: £4.12

    The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add translation detection to your project. It would be classified as a 3DoF, or 3 Degrees of Freedom. Inertial Measurement Units (or IMUs) can provide additional space location data, such as gyroscopic or magnetometric. The LIS3DH provided on this breakout operates under the same principles but gives a few analog inputs to play with, and it has some built-in movement detection abilities.

    Learn More
  8. NEW
    Mini GPS Shield diagonal view

    Mini GPS Shield

    Incl. Tax: £12.95 Excl. Tax: £10.79

    The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around the GP-735 GPS module, a 56-channel GPS receiver featuring a uBlox 7th generation chip set and an up to 10Hz update rate. The board also uses a level shifter, so there’s no need to worry about the logic voltage of your Arduino Mini.

    Learn More
  9. BLE Mate 2 diagonal view

    BLE Mate 2

    Incl. Tax: £27.23 Excl. Tax: £22.69

    This is the SparkFun BLE Mate 2, an efficient and reliable Bluetooth 4.0 development board. The BLE Mate 2 closely resembles a breakout board, in that nearly every pin on the onboard BC118 module is made available to access. This board is actually a close cousin to our Gold and Silver Bluetooth Mates and functions in a very similar way but, as the name implies, operates as Bluetooth Low Energy instead of Bluetooth 2.0.

    Learn More
  10. Micro OLED Breakout

    Micro OLED Breakout

    Incl. Tax: £12.77 Excl. Tax: £10.64

    The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resorting to serial output, and teaching a little game theory while creating a fun, Arduino-based video game. Most important of all, though, is the Micro OLED is easy to control over either an SPI or I2C interface.

    Learn More
  11. LilyTwinkle

    LilyTwinkle

    Incl. Tax: £4.96 Excl. Tax: £4.13

    The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will twinkle-fade (a lot like fireflies… or lightning bugs, if that’s what you call them). LilyTwinkle is a quick and easy way to add twinkling lights to a project without any programming or a bulky Main Board.

    Learn More
  12. DotStar Micro LEDs (APA102–2020) - Smart SMD RGB LED - 10 pack

    DotStar Micro LEDs (APA102-2020) - Smart SMD RGB LED - 10 pack

    Incl. Tax: £5.95 Excl. Tax: £4.96

    These incredibly small Dotstar APA102–2020 surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colourful dots to your project. They're mini versions of the ones in our digital DotStart strips and matrices with full chainable 2-wire control. They are just mind-bogglingly small. They are a mere 2mm x 2mm (way smaller than APA102-5050-RGB), which makes them pretty darn tiny so they might be a bit difficult to hand solder. SMT techniques with solder paste and hot air will work best here.

    Learn More

Items 1 to 10 of 211 total

per page

Grid  List 

Set Descending Direction