1721 Arduino A000070 Arduino NewCondition
9 Axes Motion Shield diagonal view

9 Axes Motion Shield

26.36

Product Code : 1721

In Stock Now : 10
Incl. Tax: £26.36 Excl. Tax: £21.97
  • 9 Axes Motion Shield diagonal view
  • 9 Axes Motion Shield bottom view
  • 9 Axes Motion Shield top view

The 9 Axes Motion Shield is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH.

The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit microcontroller running the BSX3.0 FusionLib software.

The sensor features three-dimensional acceleration, yaw rate and magnetic field strength data each in 3 perpendicular axes.

It also provides the sensor fusion signals such as:

  • Quaternion
  • Euler angles
  • Rotation vector
  • Linear acceleration
  • Gravity vector

In addition, it incorporates an intelligent interrupt engine, which allows for triggering interrupts based on:

  • slow or no motion recognition
  • any motion (slope) detection
  • high-g-detection

The maximum length and width of the 9 Axes Motion Shield PCB are 2.7 and 2.1 inches respectively. Four screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.

The Arduino 9 Axes Motion Shield is compatible with Uno, Yùn, Leonardo, Ethernet, Mega and Due boards. When using the Arduino 9 Axes Motion Shield, be sure to solder the Interrupt bridge and Reset bridge in the correct position depending on the board used.

Note: The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.

9 Axes Motion Shield compatibility

BOARD

INTERRUPT PIN

RESET PIN

Arduino Uno

D2

D4

Arduino Leonardo

D7

D4

Arduino Yun

D7

D4

Arduino Ethernet

D2

D4

Arduino Due

D2

D4

Arduino Mega

D2

D4

  • Operating Voltage: 5V
  • Power Consumption: 50mW

The shield features several TinkerKit input/output and communication interfaces. Connecting TinkerKit modules can simplify the creation of a project or a prototype. The on-board connectors are :

  • TinkerKit Inputs: IN2 and IN3 (in white), these connectors are routed to the Arduino A2 and A3 analog input pins
  • TinkerKit Outputs: OUT5 and OUT6 (in orange), these connectors are routed to the Arduino PWM outputs on pins 5 and 6
  • TinkerKit TWI: these connectors (4-pin in white) are routed on the Arduino TWI interface. Both connect to the same TWI interface to allow you to create a chain of TWI devices

Eagle files

Schematic

Arduino software

In the Arduino IDE you will find the following examples, go to File -> Examples of Arduino IDE, under NAxesMotion, there are 4 sketches for the use of 9 Axes Motion Shield:

  • Accelerometer: Example code to stream Accelerometer data
  • BareMinimum: Example code to describe the Bare Minimum
  • Euler: Example code to stream Euler data
  • Motion: Example code of a game to demonstrate the Any motion and No motion Interrupt features

You may also be interested in the following product(s)

FLORA 9-DOF Accelerometer, Gyroscope, Magnetometer - LSM9DS0

FLORA 9-DOF Accelerometer, Gyroscope, Magnetometer - LSM9DS0

Incl. Tax: £19.81 Excl. Tax: £16.51
Arduino YUN - With onboard WiFi

Arduino YUN - With onboard WiFi

Incl. Tax: £66.30 Excl. Tax: £55.25 As low as: £59.68
Arduino Starter Kit

Arduino Starter Kit

Incl. Tax: £105.47 Excl. Tax: £87.89 As low as: £94.93
SparkFun Block for Intel® Edison - 9 Degrees of Freedom

SparkFun Block for Intel® Edison - 9 Degrees of Freedom

Regular Price: £29.95

Special Price: Excl. Tax: £11.36 Incl. Tax: £13.63

Customer Reviews

Excellent product Review by Grahame L.
Your Rating
This shield makes it very easy to sense the orientation of the shield in 3D space. It's simple to use and provides excellent results; stable, fast, reliability and accurate The data can easily be sent, via the Arduino Serial Port, and visualised as a 3D model oriented in 3D space in real time. Brilliant results and very good value.

Write Your Own Review

Only registered users can write reviews. Please, log in or register