2018 Arduino A000116 Arduino NewCondition
Arduino TIAN diagonal view

Arduino TIAN

88.46

Product Code : 2018

In Stock Now : 18

Regular Price: £93.60

Special Price: Excl. Tax: £73.72 Incl. Tax: £88.46

  • Arduino TIAN diagonal view
  • Arduino TIAN bottom view
  • Arduino TIAN top view

Arduino TIAN unleashes the power of a small computer running Linux connected to a 32-bit microcontroller. It is based on the Atheros AR9342 connected to an Atmel Cortex® M0+ 32-bit microcontroller plus all connectivity: Ethernet, Wi-Fi, Bluetooth.

The new Arduino Tian board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0+ core and a Qualcomm Atheros AR9342, which is an highly integrated MIPS processor operating at up to 533MHz and feature-rich IEEE802.11n 2x2 2.4/5 GHz dual-band WiFi module. Qualcomm Atheros MIPS supports a Linux distribution, based on OpenWRT named Linino. The Arduino Tian also has a build in 4GB eMMC memory that can be helpful to build your projects. It is possible to Switch ON/OFF the Linux port from the MCU to reduce the power consumption.

Note: The Arduino Tian requires an installation of the CP201x driver on PC. Arduino Tian CP201x Driver Software

Power

The Arduino Tian can be powered via the micro USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or a battery inserted in the Gnd and Vin pin headers. The board will automatically detect which power sources are available and choose which one to use according to the following priority: External power, target USB. External power required: 600mA and 5V.

Memory

The ATSAMD21G18 has 256 KB of flash program memory (with 69 KB used for the bootloader). The bootloader is factory pre burnt by Atmel and is stored in a dedicated ROM memory. The bootloader is protected using the NVM fuse. It also carries 32 KB of SRAM.

Input and Output

It is not possible to access the I/O pins of the Atheros AR9342. All I/O lines are tied to the Atmel SAMD21. The Atheros is connected a usb hub with 4 ports (see the block diagram) to which are connected the Bluetooth, memory eMMCs, the SAMD21 and the USB Host port.

Communication

The Arduino Tian has a number of facilities for communicating with a computer, with another Arduino or other microcontrollers, and with different devices like phones, tablets, cameras and so on. The SAMD21 provides one hardware UART and three hardware USARTs for 3.3V serial communication.

Programming

The Arduino Tian can be programmed with the Arduino software. If you use Linux-based OS follow the guide Arduino IDE onLinux-basedOS.

Uploading sketches to the SAMD21 is different from how it works with the AVR microcontrollers found in other Arduino boards: the flash memory needs to be erased before being re-programmed. Upload operation is managed by a dedicated ROM area on the SAMD21.

USB port: To use this port, select "Arduino Tian as your board in the Arduino IDE. The USB port is connected to the CP2105. Installated the driver the user view two serial ports: one for SAMD21 and other for AR9342. Connect the Tian USB port (the one closest to the reset button) to your computer. Opening and closing the USB port at 1200bps triggers a 'soft reset' procedure:the board is restarted with the boot loader.

Note: Every time you open the Serial Terminal then the Microcontroller is reset. At the moment the Bridge library isn't compatible but it is possible to use the Ciao library.

Automatic (Software) Reset

Rather than requiring a physical press of the reset button before an upload, the Tian is designed in a way that allows it to be reset by software running on a connected computer. The reset is triggered when the Tian's virtual (CDC) serial / COM port is opened at 1200 baud and then closed. When Initiation this happens, the processor will reset, breaking the USB connection to the computer (meaning that the virtual serial / COM port will disappear). After the processor resets, the bootloader starts, remaining active for about 8 seconds. The bootloader can also be initiated by pressing the MCU-RST button on the Tian. Note that when the board first powers up, it will jump straight to the user sketch, if present, rather than initiating the boot loader. Because of the way the Tian handles reset it's best to let the Arduino software try to initiate the reset before uploading, especially if you are in the habit of pressing the MCU-RSTbutton before uploading on other boards. If the software can't reset the board you can always start the bootloader by pressing the reset button on the board.

More Product details

You may also be interested in the following product(s)

Arduino YUN - With onboard WiFi

Arduino YUN - With onboard WiFi

Incl. Tax: £66.30 Excl. Tax: £55.25 As low as: £59.68
Genuino MKR1000

Genuino MKR1000

Incl. Tax: £40.34 Excl. Tax: £33.62
Arduino Starter Kit

Arduino Starter Kit

Incl. Tax: £105.47 Excl. Tax: £87.89 As low as: £94.92
Genuino ZERO

Genuino ZERO

Incl. Tax: £51.48 Excl. Tax: £42.90

Write Your Own Review

Only registered users can write reviews. Please, log in or register