1008 SparkFun DEV-11520 SparkFun NewCondition
Fio v3 - ATmega32U4 diagonal view

Fio v3 - ATmega32U4

29.78

Product Code : 1008

In Stock Now : 2
Available in 5-7 days : 18 units.
Incl. Tax: £29.78 Excl. Tax: £24.82
  • Fio v3 - ATmega32U4 top view
  • Fio v3 - ATmega32U4 bottom view
  • Fio v3 - ATmega32U4 with coin

The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. While the Fio v3 is not yet compatible with the Arduino v1.0 IDE, it's still a very capable XBee-ready development board.

The JST-connector and 3.3v system voltage make this a great development tool for portable devices, simply plug in a Li-Poly battery and you're ready to go. Wireless sensor networks and communication are made easy by the on-board XBee socket.

The ATmega32U4, running at 8MHz, makes it possible for you to use the on-board USB jack not only to charge a connected Li-Poly battery but to actually program the device! Because this board uses a similar bootloader to the one on the Pro Micro, you will need to download and install the special software driver below. There's also a board definition add-on for the Arduino IDE which will add support for this board.

  • ATmega32U4 running at 8MHz
  • Arduino-Compatible Bootloader
  • XBee Socket
  • Lithium Polymer Battery Compatible
  • MCP73831T LiPo Charger
  • Reset button
  • On/Off Switch
  • Status/Charge/RSSI LEDs

You may also be interested in the following product(s)

XBee 1mW Trace Antenna - Series 1 (802.15.4)

XBee 1mW Trace Antenna - Series 1 (802.15.4)

Incl. Tax: £28.37 Excl. Tax: £23.64
Xbee Pro 50mW Module with Whip Antenna (Series ZB)

Xbee Pro 50mW Module with Whip Antenna (Series ZB)

Incl. Tax: £34.79 Excl. Tax: £28.99
XBee 2mW Module with PCB Antenna (Series ZB)

XBee 2mW Module with PCB Antenna (Series ZB)

Incl. Tax: £21.00 Excl. Tax: £17.50 As low as: £16.80
Arduino Fio

Arduino Fio

Incl. Tax: £27.22 Excl. Tax: £22.68 As low as: £21.77

Write Your Own Review

Only registered users can write reviews. Please, log in or register