2153 Pi Supply PIS-0553 Pi Supply NewCondition
Flick HAT - 3D Tracking and Gesture HAT for Raspberry Pi

Flick HAT - 3D Gesture Tracking for Raspberry Pi

19.98

Product Code : 2153

In Stock Now : 22
Incl. Tax: £19.98 Excl. Tax: £16.65
  • Flick HAT - 3D Tracking and Gesture HAT for Raspberry Pi front view
  • Flick HAT - 3D Tracking and Gesture HAT for Raspberry Pi back view
  • Flick HAT - 3D Tracking and Gesture HAT for Raspberry Pi kit components
  • Flick HAT - 3D Tracking and Gesture HAT for Raspberry Pi in box
  • Flick HAT - 3D Tracking and Gesture HAT for Raspberry Pi
  • Flick HAT - 3D Tracking and Gesture HAT for Raspberry Pi

Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick HAT.

Flick is a 3D tracking and gesture HAT that lets you control the Raspberry Pi computer as if by magic! Flick uses technology that enables the PCB to detect your gestures from up to 15cm away in 3D space. Draw a circle with your hand – Flick will track it.

Integrate Flick into your Raspberry Pi project to give you multiple ways of controlling it. Using the near field gesture technology, you’re able to hide your project behind non-conductive material (wood/acrylic) and still use Flick (please note however that mounting it in this way may reduce the sensor range). Plug and play functionality allows you to get up and running within minutes. Use our software libraries (complete with one line installer) to fully explore what you can do with Flick. Control your computer, TV, music system and more all with a Flick of the wrist!

Note: Raspberry Pi board not included.

  • Compatible with Raspberry Pi A+, B+, 2B and 3B
  • Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards)
  • 3D tracking
  • Gesture sensing up to 15cm
  • Touch and Tap sensing
  • Communicates with the Raspberry Pi via I2C
  • Full software libraries (fully open-source code)
  • No soldering required
  • Dimensions: 6.5cm x 5.6cm x 0.6cm
  • One line installer
  • Fully CE and FCC tested and approved

Kit Contains:

  • 1 x Flick HAT
  • 8 x Plastic bolts
  • 4 x Plastic spacers
  • 3 x Stickers
  • 2 x Info card

Specifications:

  • Chip: MGC3130 3D Tracking and Gesture Controller
  • Detection range: 0 to 15 cm in ideal circumstances
  • Temperature Range: -20℃ to +85℃
  • Position Rate: 200 positions/sec
  • Spatial Resolution: up to 150 dpi
  • Proximity and Touch Sensing
  • Compatible with the Hillstar Development Kit over USB on PC in order to use with a computer or to program new firmware onto the board
  • Available gestures: Swipe (east to west, west to east, north to south, south to north), tap and double tap (center, east, west, north, south) and airwheel (clockwise, anti-clockwise)
  • Works even through the Flick HAT case
  • No detection blind spots
  • Low–power design
  • WEIGHT 0.06 kg
  • DIMENSIONS 13 x 7.5 x 2.5 cm

You may also be interested in the following product(s)

Flick Zero - 3D Gesture Tracking for Raspberry Pi Zero

Flick Zero - 3D Gesture Tracking for Raspberry Pi Zero

Incl. Tax: £19.98 Excl. Tax: £16.65
PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi

PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi

Incl. Tax: £44.63 Excl. Tax: £37.19
Pi PoE Switch HAT Power over Ethernet for Raspberry Pi

Pi PoE Switch HAT Power over Ethernet for Raspberry Pi

Incl. Tax: £30.00 Excl. Tax: £25.00
Flick HAT Case

Flick HAT Case

Incl. Tax: £13.00 Excl. Tax: £10.83

Write Your Own Review

Only registered users can write reviews. Please, log in or register