887 SparkFun DEV-12660 SparkFun NewCondition
MP3 Player Shield

MP3 Player Shield

28.37

Product Code : 887

In Stock Now : 1
Available in 5-7 days : 45 units.
Incl. Tax: £28.37 Excl. Tax: £23.64
  • Buy 10 for £21.28 (£25.54 incl. tax) each and save 10%
  • Buy 100 for £18.92 (£22.70 incl. tax) each and save 20%

This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an SD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield still utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.

The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header.

This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed.

Note: Please refer to the Line Out document below for important information regarding connecting this shield directly to an amplifier.

You may also be interested in the following product(s)

Stereo 20W Class D Audio Amplifier - MAX9744

Stereo 20W Class D Audio Amplifier - MAX9744

Incl. Tax: £19.86 Excl. Tax: £16.55
Arduino Uno - R3

Arduino Uno - R3

Incl. Tax: £26.40 Excl. Tax: £22.00 As low as: £21.12
Audio FX Mini Sound Board WAV/OGG Trigger 16MB Flash

Audio FX Mini Sound Board WAV/OGG Trigger 16MB Flash

Incl. Tax: £19.81 Excl. Tax: £16.51
Shield Header Kit

Shield Header Kit

Excl. Tax: £2.49 Incl. Tax: £2.99

Write Your Own Review

Only registered users can write reviews. Please, log in or register