677 Generic / OEM SCT-013-030 Generic / OEM NewCondition
Non Invasive Current Sensor - 30A

Non Invasive Current Sensor - 30A


Product Code : 677

In Stock Now : 56
Incl. Tax: £9.59 Excl. Tax: £7.99
  • Buy 10 for £7.20 (£8.64 incl. tax) each and save 10%
  • Buy 100 for £6.41 (£7.69 incl. tax) each and save 20%

This non invasive current sensor is a current clamp that can be used to detect a current of up to 30A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (like a headphone jack).

Use this to build your own energy monitor and keep your power usage down, or use it to to build an >over-current protection device for an AC load. See the link below for an example project. Check out the datasheet for the pinout of the 3.5mm jack

Customer Reviews

Product Info FYI Review by Matthew V
Your Rating
this sensor has 1800 turns and a built in sense resistor (to convert the current to voltage)

Write Your Own Review

Only registered users can write reviews. Please, log in or register