2093 SparkFun DEV-14050 SparkFun NewCondition
Serial Basic Breakout - CH340G

Serial Basic Breakout - CH340G

7.22

Product Code : 2093

In Stock Now : 3
Available in 5-7 days : 247 units.
Incl. Tax: £7.22 Excl. Tax: £6.02
  • Serial Basic Breakout - CH340G
  • Serial Basic Breakout - CH340G top view
  • Serial Basic Breakout - CH340G bottom view
  • Serial Basic Breakout - CH340G with coin

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily convert serial signals to USB. It’s a great lower-cost alternative to the extremely popular FTDI Basic.

The pinout of the Serial Basic mimics the common DTR/RX/TX/VCC/CTS/GND pinout found on hundreds of FTDI-to-USB derivatives. It can also be used as a general serial device for debugging (such as with a GPS module). There is a jumper on the rear of the board that controls the output voltage on the VCC pin. By default, the board outputs 3.3V and has 3.3V signals. Changing this jumper to 5V will cause the board to output 5V on the VCC pin with 5V signals.

You may also be interested in the following product(s)

USB to Serial TTL Cable (OEM FTDI Cable)

USB to Serial TTL Cable (OEM FTDI Cable)

Incl. Tax: £14.35 Excl. Tax: £11.96 As low as: £11.48
Breadboard Deluxe

Breadboard Deluxe

Incl. Tax: £5.40 Excl. Tax: £4.50 As low as: £4.33
Breakout Board for FT232RL USB to Serial

Breakout Board for FT232RL USB to Serial

Incl. Tax: £10.63 Excl. Tax: £8.86
SI5351A Clock Generator Breakout Board - 8KHz TO 160MHz

SI5351A Clock Generator Breakout Board - 8KHz TO 160MHz

Incl. Tax: £6.77 Excl. Tax: £5.64

Write Your Own Review

Only registered users can write reviews. Please, log in or register