2104 SparkFun SEN-14066 SparkFun NewCondition
Simultaneous RFID Reader - M6E Nano diagonal view

Simultaneous RFID Reader - M6E Nano

212.66

Product Code : 2104

In Stock Now : 1
Available in 5-7 days : 28 units.
Incl. Tax: £212.66 Excl. Tax: £177.22
  • Simultaneous RFID Reader - M6E Nano diagonal view
  • Simultaneous RFID Reader - M6E Nano with measurements
  • Simultaneous RFID Reader - M6E Nano top view
  • Simultaneous RFID Reader - M6E Nano bottom view
  • Simultaneous RFID Reader - M6E Nano
  • Simultaneous RFID Reader - M6E Nano
  • Simultaneous RFID Reader - M6E Nano
  • Simultaneous RFID Reader - M6E Nano thermal gap filler
  • Simultaneous RFID Reader - M6E Nano on microcontroller

The SparkFun simultaneous RFID reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Frequency Identification (RFID) is becoming popular everywhere for tracking practically everything. Whether you want to get started by adding an RFID reader on your toolbox with tags on all your tools or allowing access to the tree house for your secret society meetings, this board may be for you!

With the Arduino shield footprint, you can connect this directly to an Arduino-compatible board, or a different microcontroller. You can also connect directly to your computer using the FTDI header on the board and read data using the Universal Reader Assistant.

Once you’ve started, this board will read EPCglobal Gen 2 tags at up to 150 tags per second. Writing of tags is also possible at 80msec standard write. The board has adjustable power output from 0dBm to 27dBm, meaning that with the correct antenna you can read up to 16 feet (4.9m), or 1 to 2 feet with the onboard antenna.

Note: Your reader ships with a piece of gray, nonconductive thermal gap filler to help with both heat dissipation and to cover the exposed ground plane (to prevent circuits from shorting against it).

***********************

Warning: Ensure that personnel do not stand in the radiation beam of the antenna unless they are more than 21cm away from the face of the antenna (to adhere to FCC limits for long-term exposure). See Datasheet for more information.

***********************

  • EPCglobal Gen 2 (ISO 18000-6C) with nominal backscatter rate of 250kbps
  • Separate read and write levels, command adjustable from 0dBm to 27dBm in 0.01 dB steps
  • 0.84W in ready mode
  • 0.00025W in shutdown mode
  • Up to 150 tags/sec to read 96-bit EPC
  • 80msec typical for standard write of 96-bit EPC

You may also be interested in the following product(s)

RFID Reader ID-12LA (125 kHz)

RFID Reader ID-12LA (125 kHz)

Incl. Tax: £23.40 Excl. Tax: £19.50 As low as: £18.72
RFID USB Reader

RFID USB Reader

Incl. Tax: £21.28 Excl. Tax: £17.73 As low as: £17.03
UHF RFID Tag 5 Pack

UHF RFID Tag 5 Pack

Incl. Tax: £1.50 Excl. Tax: £1.25
RFID Reader/Writer - 13.56Mhz

RFID Reader/Writer - 13.56Mhz

Incl. Tax: £32.18 Excl. Tax: £26.82

Write Your Own Review

Only registered users can write reviews. Please, log in or register