2004 Great Scott Gadgets WRL-10573 Great Scott Gadgets NewCondition
Ubertooth One with antenna

Ubertooth One

140.4

Product Code : 2004

In Stock Now : 1
Available in 5-7 days : 290 units.
Incl. Tax: £140.40 Excl. Tax: £117.00
  • Ubertooth One with antenna
  • Ubertooth One
  • Ubertooth One with measurements
  • Ubertooth One antenna
  • Ubertooth One top view
  • Ubertooth One bottom view

The Ubertooth One is an open source 2.4 GHz wireless development platform suitable for Bluetooth experimentation. Based on the powerful LPC175x ARM Cortex-M3 microcontroller with full-speed USB 2.0, the Ubertooth One is a great way to develop custom Class 1 comparable Bluetooth devices. The entire board is only two and a half inches long with a USB-A connector at one end and an RP-SMA connector at the other.

One thing that sets the Ubertooth apart from other Bluetooth development platforms is that it’s capable of not only sending and receiving 2.4 GHz signals, but can also operate in monitor mode, monitoring Bluetooth traffic in real-time. This operating mode has been present in low-cost WiFi modules for years and has found myriad uses in research, development and security auditing but no such solution existed for the Bluetooth standard until now. Also, because it’s a fully open-source platform (software and hardware), the schematics and code are readily available for all of your hacking needs.

Note: In order to open the schematic and board design files found in the source package, you will need to download KiCad, an open source electronic design automation software package.

  • 2.4 GHz Transmit and Receive
  • Transmit power and receive sensitivity comparable to a Class 1 Bluetooth device
  • Standard Cortex Debug Connector (10-pin 50-mil JTAG)
  • In-System Programming (ISP) Serial Connector
  • Expansion connector intended for inter-Ubertooth communication or other future uses
  • Six Indicator LEDs
  • 2.4 GHz Duck Antenna Included
  • Dimensions: 61.75mm x 19mm (2.43" x 0.75")

Schematic

Product Page

Ubertooth Source Package

KiCad an open source electronic design automation software package

You may also be interested in the following product(s)

Bluefruit EZ-Link - Bluetooth Serial Link & Arduino Programmer - v1.0

Bluefruit EZ-Link - Bluetooth Serial Link & Arduino Programmer - v1.0

Incl. Tax: £22.33 Excl. Tax: £18.61
Bluefruit LE UART Friend - Bluetooth Low Energy

Bluefruit LE UART Friend - Bluetooth Low Energy

Incl. Tax: £19.81 Excl. Tax: £16.51
Bluetooth 4.0 Low Energy - BLE Shield v2.1

Bluetooth 4.0 Low Energy - BLE Shield v2.1

Incl. Tax: £24.82 Excl. Tax: £20.68
 

Customer Reviews

firmware building Review by matrixmike
Your Rating
I just tried building the firmware and had a few issues: total build went into a loop and some unrecognizable compiler error. You need something similar to sudo apt-get install gcc-arm-none-eabi .

If I had the money I would order one now.

I used a TDK system ages ago but that seems well obsolete.
I have been looking for one of these for a while - I just have to scrape the budget a bit

Write Your Own Review

Only registered users can write reviews. Please, log in or register