116 Arduino A000021 Arduino NewCondition
XBee Shield front view

XBee Shield

18

Product Code : 116

In Stock Now : 5
Incl. Tax: £18.00 Excl. Tax: £15.00
  • XBee Shield front view
  • XBee Shield front view
  • XBee Shield back view
  • XBee Shield front view

The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from Digi (formerly MaxStream). The shield can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.

The shields breaks out each of the Xbee's pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield.

Digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself).

XBee is a modified ZigBee protocol.

***PLEASE NOTE - THIS SHIELD DOES NOT COME FITTED WITH AN XBEE MODULE - THESE MUST BE PURCHASED SEPARATELY***

A large range of series 2 (2.5) or series ZB Xbee modules are available for purchase including modules with external antenna connectors, and modules with ranges of up to 1 mile! You can find them here

Documents

You may also be interested in the following product(s)

Xbee Pro 50mW Module with Whip Antenna (Series ZB)

Xbee Pro 50mW Module with Whip Antenna (Series ZB)

Incl. Tax: £35.40 Excl. Tax: £29.50
XBee 2mW Module with PCB Antenna (Series ZB)

XBee 2mW Module with PCB Antenna (Series ZB)

Incl. Tax: £21.00 Excl. Tax: £17.50 As low as: £16.80
XBee 1mW Trace Antenna - Series 1 (802.15.4)

XBee 1mW Trace Antenna - Series 1 (802.15.4)

Incl. Tax: £28.37 Excl. Tax: £23.64
Arduino Uno - R3

Arduino Uno - R3

Incl. Tax: £26.40 Excl. Tax: £22.00 As low as: £21.12

Write Your Own Review

Only registered users can write reviews. Please, log in or register