1055 Generic / OEM 01563 Generic / OEM NewCondition
JST PH housing pins

JST PH housing pins

0.02

Product Code : 1055

In Stock : More Than 50
Impuestos Incluídos: 0,02 € Impuestos no Incluídos: 0,02 €
JST PH housing pins is available for purchase in increments of 20

These are tiny metal pins for the JST PH housings that we sell. You will need one pin for every 'hole' that your housing has.

These can only be purchased in lots of 20.

Ideally these pins are crimped with a special tool. Crimping effectively means trapping the wire by folding a couple of the tiny metal 'wings' on this pin over it. Despite crimping being the best way, you could fold the pins over using a small pair of wire cutters or pliers. Failing this, you could just solder your wire to this pin.

Note : These pins have tiny locking tabs on them, so that once they're inserting into the JST housing, they will not come out easily. It is possible to use something like the tip of a pair of fine tweezers to push the tab down, and withdraw the pin, but it's fiddly!

Te podría(n) interesar también el/los siguiente(s) producto(s)

JST PH Plug Housing 4 pin

JST PH Plug Housing 4 pin

Impuestos Incluídos: 0,07 € Impuestos no Incluídos: 0,06 €
Crimping Pliers - 28-20 AWG

Crimping Pliers - 28-20 AWG

Impuestos Incluídos: 31,77 € Impuestos no Incluídos: 26,48 €
JST PH Plug Housing 5 pin

JST PH Plug Housing 5 pin

Impuestos Incluídos: 0,07 € Impuestos no Incluídos: 0,06 €
JST PH Plug Housing 3 pin

JST PH Plug Housing 3 pin

Impuestos Incluídos: 0,06 € Impuestos no Incluídos: 0,04 €

Escribir Tu Propia Revisión

Sólo usuarios registrados pueden escribir sus opiniones. Conéctese o regístrese