1897 Adafruit 2650 Adafruit NewCondition
LED Magician v2.0 connected to LED strips

LED Magician v2.0


Product Code : 1897

In Stock Soon

Notify me when this product is in stock:
Impuestos Incluídos: 57,12 € Impuestos no Incluídos: 47,60 €
  • LED Magician v2.0 top view
  • LED Magician v2.0 diagonal view
  • LED Magician v2.0 connected to LED strips
  • LED Magician v2.0 with coin

The LED magician v2.0 doesn't need any programming or software to drive LEDs or analogue LED strips. It is similar to a pre-programmed Arduino designed specifically for driving LEDs and has many built in effects.

The LED magician is an LED running light generator that is easy to install and use. It's tiny form factor and design is ideal for all LED related installations such as costumes, movie or stage props, RC toys, robotics or even lighting mods for your car or bike! This is the product that adds blinking/fading/chasing sequences to your otherwise boring LED lights!

It works with any 4.5v - 28v lightings. With up to 500mA output across each of its 12 Channels, you can install up to 50 LEDs per channel or 100 LEDs per channel at 5mA each. It is also ideal in driving analog LED Strips. 32 Pre-programmed blinking/chasing/ fading/running modes with 8 variable speeds are controlled by 4 buttons on the circuit board. It also features 12 indicator LEDs that shows a preview of the current running sequence and a smart microchip that "remembers" your last settings even after poweroff.

Note: The LED magician is not designed for use with 'smart' LEDs such as NeoPixels, DotStars, or other digital addressable LEDs. Best used with 'bare' LEDs or analog LED strips. It comes with one assembled LED Magician controller. No LEDs, batteries, or power suppliers included.


  • 12 output channels
  • Input Voltage = Output Voltage
  • Outputs of up to 500mA per channel
  • 32 Pre-programmed sequences, including blinking, chasing, fading effects & more
  • 8 variable speeds
  • Control via 4 buttons on-board the module
  • Options to wire-out the controls, or control using a micro-controller (eg. Arduino etc.)
  • Accepts a wide range of voltages ranging from 4.5v to 28v
  • Low power consumption
  • Indicator LEDs on-board shows a preview of the current sequence
  • Small footprint ideal for LED costumes, LED Signages, Auto, RC or Robotic Projects
  • 100% Surface-Mount Components
  • “Remembers” your last setting even after power-off via non-volatile EEPROM chip
  • Selectable input/output voltage range
  • Dedicated output ports with common anode (Positive +)
  • Application expands beyond LEDs, use it to control motors, switches, relays etc.
  • Use it to drive relays for higher currents


  • Working Voltage: DC 4.5V - 28V (Min. 3V, Max. 30V)
  • Output Channels: 12 Channels
  • Output Voltage: Output Current: Max 6A (500mA per channel)
  • Modes: 32 pre-programmed sequences, 8 variable speeds
  • Type: Common Anode
  • Controls: Via 4 x onboard push-buttons / TTL High/Low (via control output pins)
  • Power Consumption: Quiescent current - 6mA, With all indicator LEDs on -12mA
  • Working Temperature: -10 to 50°C
  • Indicator LEDs: 12 x BLUE SMD LED
  • Dimensions: 40mm x 65mm x 7mm / 1.6" x 2.6" x 0.3"

Te podría(n) interesar también el/los siguiente(s) producto(s)

LED Driver Power Supply - 40A

LED Driver Power Supply - 40A

Impuestos Incluídos: 26,87 € Impuestos no Incluídos: 22,39 €
FadeCandy NeoPixel Driver - USB-Controlled Dithering

FadeCandy NeoPixel Driver - USB-Controlled Dithering

Impuestos Incluídos: 27,80 € Impuestos no Incluídos: 23,16 €
Teensy 3.2

Teensy 3.2

Impuestos Incluídos: 28,58 € Impuestos no Incluídos: 23,82 €
LED - Assorted (20 pack)

LED - Assorted (20 pack)

Impuestos Incluídos: 3,18 € Impuestos no Incluídos: 2,65 €

Escribir Tu Propia Revisión

Sólo usuarios registrados pueden escribir sus opiniones. Conéctese o regístrese