677 Generic / OEM SCT-013-030 Generic / OEM NewCondition
Non Invasive Current Sensor - 30A

Non Invasive Current Sensor - 30A

9.59

Product Code : 677

In Stock Now : 56
Impuestos Incluídos: 10,74 € Impuestos no Incluídos: 8,95 €
  • Comprar 10 por 8,06 € (9,68 € con impuestos incluidos) cada uno y guardar 10%
  • Comprar 100 por 7,18 € (8,61 € con impuestos incluidos) cada uno y guardar 20%

This non invasive current sensor is a current clamp that can be used to detect a current of up to 30A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (like a headphone jack).

Use this to build your own energy monitor and keep your power usage down, or use it to to build an >over-current protection device for an AC load. See the link below for an example project. Check out the datasheet for the pinout of the 3.5mm jack

Escribir Tu Propia Revisión

Sólo usuarios registrados pueden escribir sus opiniones. Conéctese o regístrese