1156 Adafruit 1105 Adafruit NewCondition
Pi T-Cobbler Breakout Kit for Raspberry Pi

Pi T-Cobbler Breakout Kit for Raspberry Pi

6.82

Product Code : 1156

In Stock Soon

Notify me when this product is in stock:
Impuestos Incluídos: 7,64 € Impuestos no Incluídos: 6,36 €

This is an add on prototyping Pi T-Cobbler from Adafruit, which can break out power, GPIO, I2C and SPI pins from the Raspberry Pi 26 pin header onto a solderless breadboard. This mini kit will make "cobbling together" prototypes with the Pi easier. Designed for Raspberry Pi Model B Revision 1 or Revision 2.

The Pi T-Cobbler mini kit comes with a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A little soldering is required to put it together but it's really easy, even a beginner can do it in 15 minutes. Once soldered together, the cable plugs between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard (or even a prototyping board). The T-Cobbler PCB has all the pins labelled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk.

The Pi T-Cobbler is compatible with both versions 1 and 2 of the Raspberry Pi Computer - for version 2 computers, note that the GPIO #21 has been replaced with GPIO #27 and that the I2C pins are now I2C port #1 instead of #0. All other pins are the same.

Note: this kit only contains a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A Raspberry Pi, breadboard, jumper wires, cables, components, case, power supply, etc are not included.

Te podría(n) interesar también el/los siguiente(s) producto(s)

Breadboard Deluxe

Breadboard Deluxe

Impuestos Incluídos: 5,36 € Impuestos no Incluídos: 4,47 € Valor mínimo: 4,31 €
Jumper Wires - Male to Male

Jumper Wires - Male to Male

Impuestos Incluídos: 2,68 € Impuestos no Incluídos: 2,23 € Valor mínimo: 2,14 €
Power Supply 9V 1000mA Switched Mode

Power Supply 9V 1000mA Switched Mode

Impuestos Incluídos: 5,63 € Impuestos no Incluídos: 4,69 € Valor mínimo: 4,52 €
Jumper Wires - Male to Female

Jumper Wires - Male to Female

Impuestos Incluídos: 2,95 € Impuestos no Incluídos: 2,45 € Valor mínimo: 2,37 €

Escribir Tu Propia Revisión

Sólo usuarios registrados pueden escribir sus opiniones. Conéctese o regístrese