1008 SparkFun DEV-11520 SparkFun NewCondition
Fio v3 - ATmega32U4 diagonal view

Fio v3 - ATmega32U4


Product Code : 1008

In Stock Now : 2
Available in 5-7 days : 40 units.
TTC : 33,35 € HT : 27,80 €
  • Fio v3 - ATmega32U4 top view
  • Fio v3 - ATmega32U4 bottom view
  • Fio v3 - ATmega32U4 with coin

The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. While the Fio v3 is not yet compatible with the Arduino v1.0 IDE, it's still a very capable XBee-ready development board.

The JST-connector and 3.3v system voltage make this a great development tool for portable devices, simply plug in a Li-Poly battery and you're ready to go. Wireless sensor networks and communication are made easy by the on-board XBee socket.

The ATmega32U4, running at 8MHz, makes it possible for you to use the on-board USB jack not only to charge a connected Li-Poly battery but to actually program the device! Because this board uses a similar bootloader to the one on the Pro Micro, you will need to download and install the special software driver below. There's also a board definition add-on for the Arduino IDE which will add support for this board.

  • ATmega32U4 running at 8MHz
  • Arduino-Compatible Bootloader
  • XBee Socket
  • Lithium Polymer Battery Compatible
  • MCP73831T LiPo Charger
  • Reset button
  • On/Off Switch
  • Status/Charge/RSSI LEDs

Vous pourriez également être intéressé par le(s) produit(s) suivant(s)

Xbee Pro 50mW Module with Whip Antenna (Series ZB)

Xbee Pro 50mW Module with Whip Antenna (Series ZB)

TTC : 38,96 € HT : 32,47 €
XBee 1mW Trace Antenna - Series 1 (802.15.4)

XBee 1mW Trace Antenna - Series 1 (802.15.4)

TTC : 31,77 € HT : 26,48 €
XBee Explorer Dongle

XBee Explorer Dongle

TTC : 28,58 € HT : 23,82 €
XBee 2mW Module with PCB Antenna (Series ZB)

XBee 2mW Module with PCB Antenna (Series ZB)

TTC : 23,52 € HT : 19,60 € Prix spécial : 18,82 €

Rédigez votre propre commentaire

Seuls les utilisateurs inscrits peuvent écrire des commentaires. Veuillez vous connecter ou vous enregistrer