1123 Adafruit 254 Adafruit NewCondition
MicroSD Breakout

MicroSD Breakout

14.89

Product Code : 1123

In Stock Now : 34
TTC : 16,68 € HT : 13,90 €
Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use.

To use with an Arduino, connect GND to ground, 5V to 5V, CLK to pin 13, DO to pin 12, DI to pin 11, and CS to pin 10.

  • Onboard 5v->3v regulator provides 150mA for power-hungry cards
  • 3v level shifting means you can use this with ease on either 3v or 5v systems
  • Uses a proper level shifting chip, not resistors: less problems, and faster read/write access
  • Use 3 or 4 digital pins to read and write 2Gb+ of storage!
  • Activity LED lights up when the SD card is being read or written
  • Four #2 mounting holes
  • Push-push socket with card slightly over the edge of the PCB so its easy to insert and remove
  • Comes with 0.1" header (unattached) so you can get it on a breadboard or use wires - your choice
  • Tested and assembled at the Adafruit factory
  • Works great with Arduino, with tons of example code and wiring diagrams

Dimensions: 31.85mm x 25.4 x 3.75mm, Weight: 3.43g

Vous pourriez également être intéressé par le(s) produit(s) suivant(s)

Micro SD Memory card 16Gb Class 10 with adapter

Micro SD Memory card 16Gb Class 10 with adapter

TTC : 17,88 € HT : 14,90 €
     

Rédigez votre propre commentaire

Seuls les utilisateurs inscrits peuvent écrire des commentaires. Veuillez vous connecter ou vous enregistrer