1289 Adafruit 1487 Adafruit NewCondition
NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

34.74

Product Code : 1289

In Stock Now : 4
TTC : 38,91 € HT : 32,42 €
  • Achetez-en 10 à 29,19 € (35,02 € TTC) pièce et économisez 10%

Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGB LEDs adorn the NeoMatrix for a blast of configurable color. Arranged in an 8x8 matrix, each pixel is individually addressable. Only one microcontroller pin is required to control all the LEDs, and you get 24 bit color for each LED.

Wiring it up is easy: there are two 3-pin connection ports. Solder wires to the input port and provide 5VDC to the +5V and ground pins, then connect the DIN pin to your microcontroller. If you're using our NeoPixel Arduino library, use digital #6. You'll also need to make a common ground from the 5V power supply to the microcontroller/Arduino. Since each LED can draw as much as 60mA (thats up to 3.5 Amps per panel if all LEDs are on bright white!) we suggest our 5V 2A power supply. For most uses, you'll see about 1-2A of current per panel.

If, say, you need MORE blinky, you can chain these together. For the second shield, connect the DIN connection to the first panel's DOUT. Also connect a ground pin together and power with 5V. There you go! You can chain as many as you'd like although after 4 or more panels you may run low on RAM if you're using an UNO. Watch your power usage too, you may need a 5V 10A power supply for so many of these!

There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microcontroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. The Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.

  • Dimensions: 71.17mm / 2.8" x 71.17mm / 2.8" x 3.28mm / 0.12"
  • Weight: 24.21g

Vous pourriez également être intéressé par le(s) produit(s) suivant(s)

8x32 Flexible RGB LED Matrix Intelligent control light source

8x32 Flexible RGB LED Matrix Intelligent control light source

TTC : 94,07 € HT : 78,39 €
NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers

NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers

TTC : 6,66 € HT : 5,56 €
36mm Square 12V Digital RGB Addressable LED Pixels (Strand of 20) - WS2801

36mm Square 12V Digital RGB Addressable LED Pixels (Strand of 20) - WS2801

TTC : 13,43 € HT : 11,19 € Prix spécial : 10,76 €
APA102 5050 RGB LED with Integrated Driver Chip - 10 Pack

APA102 5050 RGB LED with Integrated Driver Chip - 10 Pack

TTC : 4,69 € HT : 3,91 €

Rédigez votre propre commentaire

Seuls les utilisateurs inscrits peuvent écrire des commentaires. Veuillez vous connecter ou vous enregistrer