2061 SparkFun DEV-12587 SparkFun NewCondition
Pro Micro - 3.3V/8MHz

Pro Micro - 3.3V/8MHz

18.43

Product Code : 2061

In Stock Now : 1
Available in 5-7 days : 82 units.
TTC : 20,64 € HT : 17,20 €
  • Pro Micro - 3.3V/8MHz
  • Pro Micro - 3.3V/8MHz bottom view
  • Pro Micro - 3.3V/8MHz with coin
  • Pro Micro - 3.3V/8MHz top view

The Pro Micro 3.3V/8MHz is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.

This tiny little board does all of the neat Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 8MHz and 3.3V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.

This is the 3.3V version so, as always, keep in mind the limits of system voltage. The lower system voltage also has its advantages, though, like ease of use with many common 3.3V sensors. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

  • Dimensions: 1.3x0.7"
  • ATMega 32U4 running at 3.3V/8MHz
  • Supported under Arduino IDE v1.0.1
  • On-Board micro-USB connector for programming
  • 4 x 10-bit ADC pins
  • 12 x Digital I/Os (5 are PWM capable)
  • Rx and Tx Hardware Serial Connections

Vous pourriez également être intéressé par le(s) produit(s) suivant(s)

Arduino Pro Mini 328 5V/16Mhz

Arduino Pro Mini 328 5V/16Mhz

TTC : 10,33 € HT : 8,60 € Prix spécial : 8,25 €
Arduino Fio

Arduino Fio

TTC : 30,49 € HT : 25,40 € Prix spécial : 24,38 €
Pro Micro - 5V/16MHz

Pro Micro - 5V/16MHz

TTC : 20,65 € HT : 17,21 €
Arduino Pro Mini 328 3.3V/8Mhz

Arduino Pro Mini 328 3.3V/8Mhz

TTC : 10,33 € HT : 8,60 € Prix spécial : 8,28 €

Rédigez votre propre commentaire

Seuls les utilisateurs inscrits peuvent écrire des commentaires. Veuillez vous connecter ou vous enregistrer