2194 Pololu 3131 Pololu NewCondition
Tic T825 USB Multi-Interface Stepper Motor Controller component parts

Tic T825 USB Multi-Interface Stepper Motor Controller

32.68

Product Code : 2194

In Stock Now : 5
TTC : 36,60 € HT : 30,50 €
  • Tic T825 USB Multi-Interface Stepper Motor Controller with coin
  • Tic T825 USB Multi-Interface Stepper Motor Controller assembled
  • Tic T825 USB Multi-Interface Stepper Motor Controller top view
  • Tic T825 USB Multi-Interface Stepper Motor Controller pinout

The Tic T825 USB multi-interface stepper motor controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8825 driver and male headers and terminal blocks are included but not soldered. It can operate from 8.5 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).

The stepper motor controller is a versatile, general-purpose controller designed to control one bipolar stepper motor. With a variety of supported interfaces–USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analog voltages for use with a potentiometer or analog joystick, and quadrature encoder for use with a rotary encoder dial–and a wide array of configurable settings, the Tic T825 makes it easy to add basic control of a bipolar stepper motor to a variety of projects. A free configuration utility (for Windows, Linux, and macOS) simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.

The Tic T825 is based on the DRV8825 IC from Texas Instruments. It can operate from 8.5 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (absolute maximum is 2.5 A per phase). It has reverse protection for motor power supplies up to 40 V. This version is sold unassembled so soldering is necessary to use it.

  • Size: 1.50″ × 1.05″ × 0.42″1
  • Weight: 5.1 g
  • Motor driver: DRV8825
  • Control interface: USB; non-inverted TTL serial; I²C;
  • RC servo pulses; analog voltage; quadrature encoder
  • Minimum operating voltage: 8.5 V
  • Maximum operating voltage: 45 V (Reverse voltage protection only works up to 40 V)
  • Continuous current per phase: 1.5 A (Without a heat sink or forced air flow)
  • Maximum current per phase: 2.5 A (With sufficient additional cooling)
  • Maximum step rate: 50000 PPS
  • Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
  • Reverse voltage protection: To -40 V. Connecting supplies over 40 V in reverse can damage the device

Vous pourriez également être intéressé par le(s) produit(s) suivant(s)

Stepper Motor with Cable

Stepper Motor with Cable

TTC : 16,20 € HT : 13,50 € Prix spécial : 12,96 €
AMIS-30543 Stepper Motor Driver Carrier

AMIS-30543 Stepper Motor Driver Carrier

TTC : 20,15 € HT : 16,79 €
Stepper Motor Driver A4988 Carrier - Black Edition

Stepper Motor Driver A4988 Carrier - Black Edition

TTC : 9,15 € HT : 7,63 € Prix spécial : 8,24 €
DRV8834 Low-Voltage Stepper Motor Driver Carrier

DRV8834 Low-Voltage Stepper Motor Driver Carrier

TTC : 9,45 € HT : 7,87 €

Rédigez votre propre commentaire

Seuls les utilisateurs inscrits peuvent écrire des commentaires. Veuillez vous connecter ou vous enregistrer