1122 SparkFun SEN-08942 SparkFun NewCondition
Weather Meters

Weather Meters

70.91

Product Code : 1122

In Stock Soon

Notify me when this product is in stock:
TTC : 79,42 € HT : 66,18 €

Whether you're an agriculturalist, a professional meteorologist or a weather hobbyist, building your own weather station can be a really rewarding project. When you're measuring weather, however, you need some pretty specialized sensors. This kit represents the three core components of weather measurement: wind speed, wind direction and rainfall.

None of the sensors in this kit contain active electronics, instead they use sealed magnetic reed switches and magnets so you'll need to source a voltage to take any measurements. The positive side of this is that the sensors are easy to interpret:

The rain gauge is a self-emptying bucket-type rain gauge which activates a momentary button closure for each 0.28mm; of rain that are collected. The anemometer (wind speed meter) encodes the wind speed by simply closing a switch which each rotation. A wind speed of 1.492 MPH produces a switch closure once per second. Finally, the wind vane reports wind direction as a voltage which is produced by the combination of resistors inside the sensor. When a voltage is supplied, the voltage returned can be translated to any of 16 possible positions. For more information on how this works, as well as a table of voltage and resistance values for each position, refer to the manual below.

All of the included sensors are supplied with RJ11 terminated cables, for information on the pin-out of the cable, check out the datasheet.

Dimensions: 72cm x 20cm

Kit Includes:

  • Wind Vane
  • Cup Anemometer
  • Tipping Bucket Rain Gauge
  • Two-Part Mounting Mast
  • Rain Gauge Mounting Arm
  • Wind Meter Mounting Bar
  • 2 x Mounting Clamps
  • 4 x Zip Ties

Note: Some basic assembly is required.

Vous pourriez également être intéressé par le(s) produit(s) suivant(s)

Arduino Uno - R3

Arduino Uno - R3

TTC : 29,57 € HT : 24,64 € Prix spécial : 23,65 €
Seeeduino Stalker v3

Seeeduino Stalker v3

TTC : 40,31 € HT : 33,59 € Prix spécial : 32,27 €
Weather Shield for Arduino Uno

Weather Shield for Arduino Uno

TTC : 48,81 € HT : 40,68 €
 

Rédigez votre propre commentaire

Seuls les utilisateurs inscrits peuvent écrire des commentaires. Veuillez vous connecter ou vous enregistrer