1880 Generic / OEM SJ-10060-102 Generic / OEM NewCondition
APA102 Digital White Addressable LED Weatherproof Strip 60 LED -4m

APA102 Digital White Addressable LED Weatherproof Strip 60 LED/m

23.99

Product Code : 1880

In Stock : More Than 50
Tasse incluse: 26,87 € Tasse escluse: 22,39 €
  • Acquista 10 per 20,16 € (24,19 € incl. tasse) ciascuno e risparmia 10%
  • Acquista 100 per 17,93 € (21,52 € incl. tasse) ciascuno e risparmia 20%
APA102 Digital White Addressable LED Weatherproof Strip 60 LED/m is available for purchase in increments of 4
  • APA102 Digital White Addressable LED Weatherproof Strip 60 LED -4m
  • APA102 Digital White Addressable LED Weatherproof Strip 60 LED -4m
  • APA102 Digital White Addressable LED Weatherproof Strip 60 LED -4m
  • APA102 Digital White Addressable LED Weatherproof Strip 60 LED -4m

***This item is sometimes sold under the made up name 'Dotstar' - but this is just a name. Our APA102 strips come from the same factory and are exactly equivalent***

There are 60 LEDs per meter, and each strip is sold in 4 meter lengths. Each strip can be easily cut, or can be 'daisy chained' with other strips in order to produce long chains of LEDs.

** These LED strips are only available in 4 meter rolls. **

This flexible Cool White LED strip uses the newer APA102C LED chips instead of the older WS2801 chips. The APA102C chips are easier to control and offer faster (20kHz) PWM rates for flicker free performance. This strip comes with white PCB.

Each LED on the strip is 5050 size, and has an embedded microcontroller inside it which controls brightness levels, and interprets the data you send it. Each strip needs two wires to control all LEDs, one clock and one data. This arrangement makes it easier to use with slower devices like the Arduino Uno.

Power supply to the strip is 5V. It's wise to consider that each LED can consume around 60mA at full brightness - multiply that by 60 (per metre) and you have over 3.5A, or about 18W of power dissipation. We recommend a relatively meaty power supply, with connections every 2 to 3 metres on a long run strip.

Each strip is mounted inside a plastic weatherpoof sleeve. This can be easily removed with a sharp knife if need be. At the ends of the strips are male/female 4 pin JST-SH plugs which allow multiple strips to be connected. The power lines are broken out onto separate wires for easy access.

Addressable LED Strips - Common Questions

  • Dimensions: Width 14mm in flexible plastic coating, 12mm out of coating.

  • Colour temp: 6000K
  • Beam angle: 140deg
  • Operating voltage: 5V
  • Consumption watts per 60 LEDs/M: 18(max)W
  • Pixelpitch: P16.1mm
  • Pixel resolution: (Dot/㎡) 3600
  • LED quantity: 60pcs x 4m
  • Printed circuit board thickness: 0.25mm
  • Consumption watts per 60 LEDs/M: 18(max)W
  • Operation Temperature: -40 to +40 degrees celcius
  • Storage Temperature: -10 to +50 degrees celcius

Potresti essere interessato anche ai seguenti prodotti

JST SM - Female Housing (4 pin)

JST SM - Female Housing (4 pin)

Tasse incluse: 0,16 € Tasse escluse: 0,13 €
APA102 Digital RGB Addressable LED Weatherproof Strip 60 LED -1m

APA102 Digital RGB Addressable LED Weatherproof Strip 60 LED -1m

Tasse incluse: 28,75 € Tasse escluse: 23,96 € A partire da: 22,99 €
JST SM - Male Housing (4 pin)

JST SM - Male Housing (4 pin)

Tasse incluse: 0,16 € Tasse escluse: 0,13 €
APA102 5050 RGB LED with Integrated Driver Chip - 10 Pack

APA102 5050 RGB LED with Integrated Driver Chip - 10 Pack

Tasse incluse: 4,69 € Tasse escluse: 3,91 €

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati