1348 SparkFun SEN-11824 SparkFun NewCondition
Barometric Pressure Sensor - BMP180 Breakout

Barometric Pressure Sensor - BMP180 Breakout

Product Code : 1348

In Stock Soon

Tasse incluse: 9,53 € Tasse escluse: 7,94 €

This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It's based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. What makes this sensor great is that it is nearly identical to its former rev, the BMP085!

This breadboard-friendly board breaks out every pin to a 6-pin 0.1" pitch header. VCC can be from 1.8V to 3.6V and is 5V tolerant; we typically run it on a clean, regulated 3.3V supply. The analogue and digital supplies (VDDD and VDDA) are tied to a single header pin, but are separately decoupled. It connects to a microcontroller via I²C bus (also known as TWI, or on the Arduino, the "Wire" library).

  • Digital two wire (I²C, TWI, "Wire") interface
  • Wide barometric pressure range
  • Flexible supply voltage range (1.8V to 3.6V)
  • Ultra-low power consumption
  • Low noise measurements
  • Factory-calibrated
  • Includes temperature sensor
  • Low-profile with a small footprint

Potresti essere interessato anche ai seguenti prodotti

Header Row (Pin/Male)

Header Row (Pin/Male)

Tasse incluse: 2,42 € Tasse escluse: 2,02 € A partire da: 1,69 €
Header Row Right Angle 1 Row (Pin/Male)

Header Row Right Angle 1 Row (Pin/Male)

Tasse incluse: 1,72 € Tasse escluse: 1,43 €
Weather Meters

Weather Meters

Tasse incluse: 79,42 € Tasse escluse: 66,18 €
 

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati