1027 PulsarProFX FlexPCB-FR4 PulsarProFX NewCondition
FlexPCB Single Sided

FlexPCB Single Sided

19.19

Product Code : 1027

In Stock Now : 20
Tasse incluse: 21,49 € Tasse escluse: 17,91 €

This is a 2-panel pack of flexible single sided copper / fibreglass flexible PCB substrate. Each panel measures 8 x 10 inches and is designed to be used with the Pulsar ProFX 'Fab-in-a-box' system, although it can be used normally as well.

Because the substrate is flexible, you can create all manner of bendy PCBs.

This substrate can only be bent by a certain amount, and will snap if you try to do a sharp crease. There are ways around this, details in the full description of the product on the manufacturer's website (link below)

The laminate uses 1/2oz copper and is suitable for SMD components.

  • G10/FR4 spec
  • Fibreglass material
  • 2 panels in each pack
  • Thickness : 0.005 inches
  • Size : 8x10 inches
  • Copper Weight : 1/2oz
  • 'Carrier Board' included
  • Cuts with scissors
  • Lamination Properties (per NEMA based on .500 sheet)
    • Minimum Breakdown Voltage : Condition A : 45.000
    • Maximum Permitivity @ 1Mhz : Condition A : 5.200
    • Maximum Dissipation Factor @ 1Mhz : Condition A : 0.025
    • Minimum Bonding Strengh : Condition A : 2000.000
    • Maximum Water Absorbtion : 0.10%
    • Minimum Izod Impact Strength : Lengthwise = 7.000, Crosswise = 5.500
    • Minimum Flextual Strength : Lengthwise = 45.000, Crosswise = 35.000

Potresti essere interessato anche ai seguenti prodotti

PCB Toner Transfer Paper

PCB Toner Transfer Paper

Tasse incluse: 18,27 € Tasse escluse: 15,22 €
PCB Fab-in-a-Box Kit

PCB Fab-in-a-Box Kit

Tasse incluse: 80,63 € Tasse escluse: 67,19 €
PCB Green TRF Foil

PCB Green TRF Foil

Tasse incluse: 10,94 € Tasse escluse: 9,12 €
FlexPCB Double Sided

FlexPCB Double Sided

Prezzo di listino: 30,49 €

Prezzo speciale: Tasse escluse: 23,21 € Tasse incluse: 27,84 €

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati