1018 Generic / OEM SCT-013-060 Generic / OEM NewCondition
Non Invasive Current Sensor - 60A

Non Invasive Current Sensor - 60A


Product Code : 1018

In Stock : More Than 100
Tasse incluse: 9,40 € Tasse escluse: 7,83 €
  • Acquista 10 per 7,06 € (8,47 € incl. tasse) ciascuno e risparmia 10%
  • Acquista 100 per 6,28 € (7,54 € incl. tasse) ciascuno e risparmia 20%

This non invasive current sensor is a current clamp that can be used to detect a current of up to 60A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (like a headphone jack).

Use this to build your own energy monitor and keep your power usage down, or use it to to build an over-current protection device for an AC load. See the link below for an example project. Check out the datasheet for the pinout of the 3.5mm jack

**Please note that the picture shows the 30A version - the 60A version looks exactly similar**

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati