Polymorph Mouldable  Plastic  - 250g

Polymorph Mouldable Plastic 250g


Product Code : 2015

In Stock Now : 1
Tasse incluse: 10,07 € Tasse escluse: 8,39 €
  • Polymorph Mouldable  Plastic  - 250g
  • Polymorph Mouldable  Plastic  - 250g
  • Polymorph Mouldable  Plastic  - 250g

Polymorph is one of a new generation of commercial polymers set to have a major impact on model making and prototyping. It is a very tough material yet it can be easily moulded when heated with hot water or a hairdryer. It is stronger than most polythene used in domestic products.

Tiny plastic polycaprolactone (PCL) pellets that, when heated to 62°C, becomes mouldable putty-like material. It then solidifies as it cools becoming a solid plastic similar to nylon. Polymorph is a thermoplastic material that can be reheated and remoulded as often as is needed. It can be coloured when hot using colourant and can be painted once it cools using acrylic paints.

The material is nontoxic and waterproof when cooled and is fully biodegradable.

What do you do with it? It is perfect for making models, replacement parts, toys, sculptures, robotics, small-parts prototyping, arts/crafts, there’s almost no end to what you can do with this stuff. Try embedding LEDs into it for a cool diffuse glow effect.

Note: Polymorph should be fused in water and should not be heated above the 60°C-65°C temperature range as it may cause burns if handled.

Other Uses for Polymorph

  • Moulding of handles and orthopaedic aids
  • Vacuum forming moulds
  • Moulds for batch producing other mouldings
  • Prototype mechanical parts
  • Armatures / frames for models
  • Inserts for compliant products
  • Specialised components, such as motor mountings
  • Moulding of complete products, such as torches
  • Joining components together

  • Non-toxic, biodegradable polyester
  • Low melting temperature of about 62°C (140°F)
  • Useful for many type of robots
  • Can be melted and re-used over and over
  • Mouldable with hands or tools
  • Can be sanded, tapped, painted and machined
  • Colourants available to change colour for a custom look

How to Use Polymorph

Polymorph Penny a robot made using Polymorph

Adding colour to Polymorph

How to Use Polymorph

  • Simply heat the pellets in water to over 62°C (only use water)
  • Leave the pellets to melt in the water until they turn transparent.
  • Remove the pellets from the water and mould by hand (add colour at this stage if required)
  • Allow the Polymorph to cool until solid.
  • Re-heat if further moulding is required.

Potresti essere interessato anche ai seguenti prodotti

Colourant for Polymorph Mouldable Plastic - 5 Colour Mixed Pack

Colourant for Polymorph Mouldable Plastic - 5 Colour Mixed Pack

Tasse incluse: 7,85 € Tasse escluse: 6,54 €
Heat Shrink Kit

Heat Shrink Kit

Tasse incluse: 6,36 € Tasse escluse: 5,30 €
ABS Plastic Filament - White 500g

ABS Plastic Filament - White 500g

Tasse incluse: 33,02 € Tasse escluse: 27,52 €
Solder Paste - 50g (Lead Free)

Solder Paste - 50g (Lead Free)

Tasse incluse: 19,06 € Tasse escluse: 15,88 €

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati