1393 SparkFun SEN-12642 SparkFun NewCondition
Sound Detector

Sound Detector

9.22

Product Code : 1393

In Stock Now : 3
Tasse incluse: 10,33 € Tasse escluse: 8,60 €

The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analogue representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once.

The envelope output allows you to easily read amplitude of sound by simply measuring the analogue voltage. Gain can be adjusted with a through-hole resistor, to change the threshold of the binary (gate) output pin as well. Check the hookup guide below for more information about setting gain.

Each of the three output signals is present on the .1" header at the edge of the board. They are active simultaneously. If you aren’t using one in your particular application, simply leave that pin disconnected.

Potresti essere interessato anche ai seguenti prodotti

Rover 5 Robot Platform

Rover 5 Robot Platform

Tasse incluse: 76,25 € Tasse escluse: 63,54 €
Arduino Due

Arduino Due

Tasse incluse: 57,19 € Tasse escluse: 47,66 €
Arduino YUN - With onboard WiFi

Arduino YUN - With onboard WiFi

Tasse incluse: 74,26 € Tasse escluse: 61,88 € A partire da: 66,84 €
Arduino Leonardo (with headers)

Arduino Leonardo (with headers)

Tasse incluse: 26,61 € Tasse escluse: 22,18 € A partire da: 23,95 €

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati