1454 Generic / OEM 519 Generic / OEM NewCondition
Conductive Rubber Cord Stretch Sensor + extras!

Conductive Rubber Cord Stretch Sensor + extras!

9.92

Product Code : 1454

In Stock Now : 10
Incl. BTW: € 11,11 Excl. BTW: € 9,26

Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of carbon-black impregnated rubber. Usually this material is used for EMF gasketing, but its also very fun to play with.

In a 'relaxed' state, the resistance is about 350 ohms per inch. As you pull on it, the resistance increases (the particles get further apart). As you stretch it out, the resistance increases linearly. So lets say you have a 6" piece - thats about 2.1 Kohms. Stretch it to 10" long and now it is 10"/6"*2.1K = 3.5 Kohms. You can stretch the rubber about 50-70% longer than the resting length, so a 6" piece shouldn't be stretched more than 10". Once the force is released, the rubber will shrink back, although its not very 'fast' and it takes a minute or two to revert to its original length.

This stuff is fun, so we give you a full meter and also two alligator clips (to connect to the cord) and a 10K resistor. Together, you can use these to make a simple voltage divider.

  • Diameter: 2mm
  • Resistance: 350-400 ohms per inch / 140 - 160 ohms per centimetre

U bent wellicht ook geïnteresseerd in de volgende producten

LilyPad Arduino USB - ATmega32U4 Board

LilyPad Arduino USB - ATmega32U4 Board

Incl. BTW: € 23,83 Excl. BTW: € 19,86
LilyPad Starter Kit

LilyPad Starter Kit

Excl. BTW: € 94,63 Incl. BTW: € 113,56
LilyPad SimpleSnap

LilyPad SimpleSnap

Incl. BTW: € 30,17 Excl. BTW: € 25,14
LilyPad Arduino 328 Main Board

LilyPad Arduino 328 Main Board

Incl. BTW: € 21,08 Excl. BTW: € 17,56

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren