1028 PulsarProFX PulsarProFX NewCondition
FlexPCB Double Sided

FlexPCB Double Sided

24.86

Product Code : 1028

In Stock Now : 26

Normale prijs: € 30,49

Aanbiedingsprijs: Excl. BTW: € 23,21 Incl. BTW: € 27,84

This is a 2-panel pack of flexible double sided copper / fibreglass flexible PCB substrate. Each panel measures 8 x 10 inches and is designed to be used with the Pulsar ProFX 'Fab-in-a-box' system, although it can be used normally as well.

Because the substrate is flexible, you can create all manner of bendy PCBs.

This substrate can only be bent by a certain amount, and will snap if you try to do a sharp crease. There are ways around this, details in the full description of the product on the manufacturer's website (link below)

The laminate uses 1/2oz copper and is suitable for SMD components.

  • G10/FR4 spec
  • Fibreglass material
  • 2 panels in each pack
  • Thickness : 0.005 inches
  • Size : 8x10 inches
  • Copper Weight : 1/2oz
  • 'Carrier Board' included
  • Cuts with scissors
  • Lamination Properties (per NEMA based on .500 sheet)
    • Minimum Breakdown Voltage : Condition A : 45.000
    • Maximum Permitivity @ 1Mhz : Condition A : 5.200
    • Maximum Dissipation Factor @ 1Mhz : Condition A : 0.025
    • Minimum Bonding Strengh : Condition A : 2000.000
    • Maximum Water Absorbtion : 0.10%
    • Minimum Izod Impact Strength : Lengthwise = 7.000, Crosswise = 5.500
    • Minimum Flextual Strength : Lengthwise = 45.000, Crosswise = 35.000

U bent wellicht ook geïnteresseerd in de volgende producten

PCB Green TRF Foil

PCB Green TRF Foil

Incl. BTW: € 10,94 Excl. BTW: € 9,12
FlexPCB Single Sided

FlexPCB Single Sided

Incl. BTW: € 21,49 Excl. BTW: € 17,91
PCB Fab-in-a-Box Kit

PCB Fab-in-a-Box Kit

Incl. BTW: € 80,63 Excl. BTW: € 67,19
Double Sided PCB Laminate

Double Sided PCB Laminate

Normale prijs: € 24,38

Aanbiedingsprijs: Excl. BTW: € 14,63 Incl. BTW: € 17,55

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren