2046 COOLFSR NewCondition
Force Sensitive Resistor Selection

Force Sensitive Resistor Selection

41.99

Product Code : 2046

Beschikbaarheid: Op voorraad

Excl. BTW: € 39,19 Incl. BTW: € 47,03

Prijs zoals geconfigureerd: Excl. BTW: € 39,19 Incl. BTW: € 39,19

  • Force Sensitive Resistor Selection
  • Force Sensitive Resistor Square
  • Force Sensitive Resistor 0.5 inch
  • Force Sensitive Resistor Small

This force sensitive resistor selection is a collection of the most used sensors to measure pressure or force being applied, it includes a square FSR, 2 x 0.5 inch FSRs and 4 x small FSRs making it a great option for a variety of electronics projects.

The square force sensitive resistor has a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

The 0.5 inch FSR has a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.

Two pins extend from the bottom of the sensors with 0.1" pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.

These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.

Kit Includes:

  • 1 x Force Sensitive Resistor - Square
  • 2 x Force Sensitive Resistor 0.5 inch
  • 4 x Force Sensitive Resistor - Small

Force Sensitive Resistor - Square:

  • Overall length: 3.5"
  • Overall width: 1.75"
  • Sensing area: 1.75x1.5"

Force Sensitive Resistor 0.5 inch:

  • Overall length: 2.375"
  • Overall width: 0.75"
  • Sensing diameter: 0.5"

Force Sensitive Resistor - Small:

  • Overall length: 1.75"
  • Overall width: 0.28"
  • Sensing area: 0.3"

* Verplichte velden

Prijs zoals geconfigureerd: Excl. BTW: € 39,19 Incl. BTW: € 39,19

U bent wellicht ook geïnteresseerd in de volgende producten

Pressure-Sensitive Velostat Conductive Sheet  By The Metre

Pressure-Sensitive Velostat Conductive Sheet By The Metre

Incl. BTW: € 16,71 Excl. BTW: € 13,92 Vanaf: € 15,04
Conductive Rubber Cord Stretch Sensor + extras!

Conductive Rubber Cord Stretch Sensor + extras!

Incl. BTW: € 11,11 Excl. BTW: € 9,26
Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)

Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)

Incl. BTW: € 4,45 Excl. BTW: € 3,71
Altitude/Pressure Sensor - MPL3115A2 Breakout

Altitude/Pressure Sensor - MPL3115A2 Breakout

Incl. BTW: € 14,36 Excl. BTW: € 11,96

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren