2083 Kitronic 5603 Kitronic NewCondition
Inventor's Kit for BBC micro:bit with 10 Experiments

Inventors Kit for BBC micro:bit with 10 Experiments


Product Code : 2083

In Stock Now : 28
Incl. BTW: € 29,30 Excl. BTW: € 24,42
  • Inventor's Kit for BBC micro:bit with 10 Experiments
  • Inventor's Kit for BBC micro:bit with 10 Experiments

This Inventor's Kit for the BBC micro:bit by Kitronik is the perfect way to get started with programming and hardware interaction with the BBC micro:bit. The experiments included are: say 'Hello' to the BBC micro:bit, using an LDR and analogue inputs, dimming an LED using a potentiometer, using a transistor to drive a motor, using the accelerometer to control motor speed, setting the tone with a piezo buzzer, wind power, making a game using the compass, capacitor charge circuit and using an RGB LED.

To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The inventor's kit for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard, it is easy to use these pins to connect additional components to the BBC micro:bit.

Note: BBC micro:bit is NOT included.

  • Construct your first circuit in minutes
  • No soldering required
  • Makes 10 experiments included in the step-by-step tutorial book
  • All parts are included to conduct the 10 experiments
  • Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board
  • Small prototype breadboard included for fast prototyping


  • 1 x BBC micro:bit
  • 1 x Phillips Screwdriver
  • 1 x Terminal Block Screwdriver
  • 1 x Micro USB Cable

All of the experiments included in this booklet are based on the Microsoft BlockEditor and Microsoft TouchDevelop editor software. We have also produced a MicroPython code example for each of the experiments and Video resources featuring a walk-through and hints and tips to help you complete the experiments.

U bent wellicht ook geïnteresseerd in de volgende producten

Battery Holder - 2x AAA with 2 Pin JST Connector for BBC micro:bit

Battery Holder - 2x AAA with 2 Pin JST Connector for BBC micro:bit

Incl. BTW: € 1,21 Excl. BTW: € 1,01
BBC micro:bit Starter Kit

BBC micro:bit Starter Kit

Excl. BTW: € 16,63 Incl. BTW: € 19,96
USB A to micro B Cable

USB A to micro B Cable

Incl. BTW: € 3,64 Excl. BTW: € 3,04 Vanaf: € 2,91
BBC micro:bit - Official boxed

BBC micro:bit - Official boxed

Incl. BTW: € 17,01 Excl. BTW: € 14,18 Vanaf: € 15,32

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren