1657 Adafruit 661 Adafruit NewCondition
Monochrome 128x32 SPI OLED graphic display letters image

Monochrome 128x32 SPI OLED graphic display

16.79

Product Code : 1657

In Stock Now : 8
Incl. BTW: € 18,80 Excl. BTW: € 15,67
  • Koop 10 voor € 14,11 (€ 16,93 incl. BTW) per stuk. en bespaar 10%
  • Monochrome 128x32 SPI OLED graphic display comet image
  • Monochrome 128x32 SPI OLED graphic display numbers image
  • Monochrome 128x32 SPI OLED graphic display letters image
  • Monochrome 128x32 SPI OLED graphic display stars image
  • Monochrome 128x32 SPI OLED graphic display lines image
  • Monochrome 128x32 SPI OLED graphic display star and circle image
  • Monochrome 128x32 SPI OLED graphic display front view with headers
  • Monochrome 128x32 SPI OLED graphic display back view with coin

The Monochrome 128x32 SPI OLED has a crisp, high contrast display making it very readable even for its small size. This display is made of individual white OLED pixels, each one is turned on or off by the controller chip. The display makes its own light, no backlight is required, this reduces the power required to run.

The driver chip SSD1306, communicates via SPI only. 4 or 5 pins are required to communicate with the chip in the OLED display.

The OLED and driver require a 3.3V power supply and 3.3V logic levels for communication. A 3.3v regulator and level shifter has been added to the board! This makes it compatible with any 5V microcontroller, such as the Arduino. The power requirements depend on how much of the display is lit but on average the display uses about 20mA from the 3.3V supply. Built into the OLED driver is a simple switch-cap charge pump that turns 3.3v-5v into a high voltage drive for the OLEDs, making it one of the easiest ways to get an OLED into your project!

The Monochrome 128x32 SPI OLED Datasheet

Tutorial and SSD1306 OLED display Arduino library from github example code for text and graphics. A microcontroller with more than 512 bytes of RAM is needed since the display must be buffered.

Dimensions:

  • PCB: 23mm x 33mm x 5mm / 0.9" x 1.3" x 0.2"
  • Mounting Holes Distance: 15mm x 24mm / 0.6" x 0.9"
  • Mounting Hole Diameter: 2mm / 0.08"
  • Display area: 7mm x 25mm

Display details:

  • Diagonal Screen Size:0.91"
  • Number of Pixels:128 × 32
  • Color Depth:Monochrome (White)
  • Module Construction:COG
  • Module Size (mm):46.30× 11.50 × 1.45
  • Panel Size (mm):30.00 × 11.50 × 1.45
  • Active Area (mm):22.384 × 5.584
  • Pixel Pitch (mm):0.175 × 0.175
  • Pixel Size (mm):0.159 × 0.159
  • Duty:1/32
  • Brightness ( cd/m2):150 (Typ) @ 7.25V
  • Interface:4-wire SPI
  • Display current draw is completely dependent on your usage: each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~15mA or so in practice but for precise numbers you must measure the current in your usage circuit.

OLED PCB files

Netduino driver, Netduino sample and documentation. This sample displays bitmaps and animations on the display.

U bent wellicht ook geïnteresseerd in de volgende producten

MicroView - OLED Arduino Module

MicroView - OLED Arduino Module

Incl. BTW: € 38,11 Excl. BTW: € 31,76
     

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren