1826 Adafruit 2423 Adafruit NewCondition
PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi example view

PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi

44.63

Product Code : 1826

In Stock Now : 9
Incl. BTW: € 49,99 Excl. BTW: € 41,65
  • PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi with coin
  • PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi showing code
  • PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi attached
  • PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi diagonal view
  • PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi example view
  • PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi front view
  • PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen for Raspberry Pi example view

The PiTFT Plus capacitive touchscreen display for the Raspberry Pi features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. The screen looks much nicer than previous versions, with a black bezel and glass overlay.

This updated design fits perfectly onto the Pi Model A+, B+, or Pi 2! Works just like the Model B version, but now matches the outline of the Raspberry Pi 2 and Model B+. It also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath. Now that it's the same outline as a Pi 2/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base.

The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. There are 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

The PiTFT can be used for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.

Note:Raspberry Pi computer and enclosure not included! As of July 22nd, 2015 this display comes fully assembled with tactile switches.

  • Screen Dimensions: 50mm x 69mm x 4mm / 2" x 2.7" x 0.16"
  • PCB Dimensions: 56mm x 85mm x 11mm / 2.2" x 3.3" x 0.4"
  • Weight: 47g

U bent wellicht ook geïnteresseerd in de volgende producten

2.8" TFT Touch Shield for Arduino w/Capacitive Touch

2.8" TFT Touch Shield for Arduino w/Capacitive Touch

Incl. BTW: € 55,55 Excl. BTW: € 46,29
NTSC/PAL (Television) TFT Display - 3.5 Inch Diagonal

NTSC/PAL (Television) TFT Display - 3.5 Inch Diagonal

Normale prijs: € 50,04

Aanbiedingsprijs: Excl. BTW: € 38,48 Incl. BTW: € 46,18

Raspberry Pi 3 Hacking kit

Raspberry Pi 3 Hacking kit

Van: Excl. BTW: € 107,51 Incl. BTW: € 129,01

 

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren