2093 SparkFun DEV-14050 SparkFun NewCondition
Serial Basic Breakout - CH340G

Serial Basic Breakout - CH340G

Product Code : 2093

In Stock Soon

Available in 5-7 days : 97 units.
Incl. BTW: € 8,09 Excl. BTW: € 6,74
  • Serial Basic Breakout - CH340G
  • Serial Basic Breakout - CH340G top view
  • Serial Basic Breakout - CH340G bottom view
  • Serial Basic Breakout - CH340G with coin

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily convert serial signals to USB. It’s a great lower-cost alternative to the extremely popular FTDI Basic.

The pinout of the Serial Basic mimics the common DTR/RX/TX/VCC/CTS/GND pinout found on hundreds of FTDI-to-USB derivatives. It can also be used as a general serial device for debugging (such as with a GPS module). There is a jumper on the rear of the board that controls the output voltage on the VCC pin. By default, the board outputs 3.3V and has 3.3V signals. Changing this jumper to 5V will cause the board to output 5V on the VCC pin with 5V signals.

U bent wellicht ook geïnteresseerd in de volgende producten

Breadboard Deluxe

Breadboard Deluxe

Incl. BTW: € 5,36 Excl. BTW: € 4,47 Vanaf: € 4,31
SI5351A Clock Generator Breakout Board - 8KHz TO 160MHz

SI5351A Clock Generator Breakout Board - 8KHz TO 160MHz

Incl. BTW: € 7,58 Excl. BTW: € 6,32
Breakout Board for FT232RL USB to Serial

Breakout Board for FT232RL USB to Serial

Incl. BTW: € 11,91 Excl. BTW: € 9,92
USB to Serial TTL Cable (OEM FTDI Cable)

USB to Serial TTL Cable (OEM FTDI Cable)

Incl. BTW: € 16,07 Excl. BTW: € 13,40 Vanaf: € 12,86

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren