594 Maxbotix MB1210 Maxbotix NewCondition
Ultrasonic Range Finder XL-MaxSonar®-EZ1™

Ultrasonic Range Finder XL-MaxSonar®-EZ1™

35.95

Product Code : 594

In Stock Now : 14
Incl. BTW: € 40,26 Excl. BTW: € 33,56
  • Ultrasonic Range Finder XL-MaxSonar®-EZ1™
  • Ultrasonic Range Finder XL-MaxSonar®-EZ1™ Beam pattern

The XL‑MaxSonar‑EZ1 offers a lower hardware gain and a smaller, narrower detection zone than the MB1200. This makes the XL-MaxSonar-EZ1 a great choice for people detection applications.

The sensor is small in size, yet the high output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and real-time noise rejection algorithms results in virtually noise free distance readings for most users. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL‑MaxSonar‑EZ sensor line is factory calibrated to match the sensor beam patterns and provides a long range detection zone.

The XL series of MaxSonars are a super high-performance version of the easy-to-use sonar range finder. The XL series of this sensor features higher resolution, longer range, higher power output and better calibration when compared to the LV version.

The sensor provides very accurate readings from 0 to 765cm (0 to 25.1ft) with 1cm resolution. This sensor can be powered with anywhere between 3.3 and 5VDC.

Range information can be gathered through one of three methods - analog, serial, or PWM - all of which are active at the same time. The analog output will produce a voltage proportional to the measured distance, with a sensitivity of (Vcc/1024)V/cm. The serial interface is simple and formatted to RS-232, with voltages ranging from 0 to Vcc and terminal settings of 9600-8-N-1.  Finally, the PWM pin outputs a pulse-width representation of the range with a scale factor of 58us/cm.

The Maxsonar-XL series is offered in the EZ0, EZ1, EZ2, EZ3, and EZ4 versions, each with progressively narrower beam angles allowing the sensor to match the application.

Note:The Maxbotix Ultrasonic Sensors are now fully CE certified.

  • 3.3V to 5V supply with  very low average current draw
  • High acoustic power output
  • All interfaces are active simultaneously:
    • RS-232 serial
      • 0 to Vcc output range
      • 9600 baud, 8-N-1
    • Analog, (Vcc/1024) / cm
    • Pulse Width
  • Real-time auto calibration and noise rejection for every ranging cycle
  • Calibrated beam angle
  • Object detection includes zero range objects
  • Readings can occur up to every 100mS, (10-Hz rate)
  • Free run operation can continually measure and output range information
  • Triggered operation provides the range reading as desired
  • Sensor operates at 42KHz

U bent wellicht ook geïnteresseerd in de volgende producten

Ultrasonic Range Finder XL-MaxSonar®-EZ4™

Ultrasonic Range Finder XL-MaxSonar®-EZ4™

Incl. BTW: € 38,30 Excl. BTW: € 31,92
Ultrasonic Range Finder HRUSB-Maxsonar®-EZ0™

Ultrasonic Range Finder HRUSB-Maxsonar®-EZ0™

Incl. BTW: € 54,70 Excl. BTW: € 45,58
Ultrasonic Range Finder HRLV-MaxSonar®-EZ0™

Ultrasonic Range Finder HRLV-MaxSonar®-EZ0™

Incl. BTW: € 34,93 Excl. BTW: € 29,11
Ultrasonic Range Finder XL-MaxSonar®-EZ2™

Ultrasonic Range Finder XL-MaxSonar®-EZ2™

Incl. BTW: € 33,49 Excl. BTW: € 27,91

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen een review plaatsen. U kunt, inloggen of registreren