693 SparkFun DEV-10116 SparkFun NewCondition
Arduino Fio

Arduino Fio

27.22

Product Code : 693

In Stock Now : 3
Available in 5-7 days : 97 units.
Incl. Tax: $34.84 Excl. Tax: $29.03
  • Buy 10 for $26.12 ($31.35 incl. tax) each and save 11%
  • Buy 100 for $23.22 ($27.87 incl. tax) each and save 21%

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad.

Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby.

Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board. The Fio has been designed to be wirelessly reprogrammable.

Note: The miniUSB connector is used for battery charging only. To bootload new firmware, you will need an external serial connection over an FTDI cable, or other serial connection.

Note: The XBee socket and FTDI connection live on the same TX/RX pins of the ATmega328. You will need to remove the XBee module while reprogramming over serial. We recommend using a wireless bootloader whenever possible to avoid this step.

  • ATmega328V running at 8MHz
  • Arduino Bootloader
  • XBee socket
  • Lithium Polymer battery compatible
  • MAX1555 LiPo Charger
  • Reset button
  • On/Off Switch
  • Status/Charge/RSSI LEDs

Write Your Own Review

Only registered users can write reviews. Please, log in or register