1484 Generic / OEM RGBLED5mm10 Generic / OEM NewCondition
Digital RGB Addressable LED - 5mm Through-hole (10-pack)

Digital RGB Addressable LED - 5mm Through-hole (10-pack)

4

Product Code : 1484

In Stock : More Than 50
Incl. Tax: $5.12 Excl. Tax: $4.26
  • Buy 10 for $3.84 ($4.61 incl. tax) each and save 10%
  • Buy 100 for $3.42 ($4.10 incl. tax) each and save 20%
  • Buy 1000 for $3.00 ($3.60 incl. tax) each and save 30%
  • Buy 1600 for $2.60 ($3.12 incl. tax) each and save 40%

This is a 10-pack of WS2811 addressable RGB LEDs in a 5mm through-hole package. Each LED has the WS2811 driver integrated into the diffused plastic lens and is controlled through a high-speed 1-wire interface that allows for large numbers of LEDs to be chained together to form large displays.

Each colour channel of every RGB led is 8 bit. This equates to 16.7 million colours. The LEDs are controlled by shift-registers built into each lamp. In order to drive the strip you need 5v, GND and Data - easy! Once the registers are loaded, you can stop sending data.

These strips have a maximum voltage of 6V - anything higher will blow them up!

Note: As these LEDs are cased, if subjected to over-voltage or reverse voltage the casing itself can fail and parts of it can fly off at speed (it makes a high pitched wine, then a pop as the top comes flying off - not something you want to hit you in the eye!)

  • Maximum 5V @ 60mA draw per 0.65" strip segment (all LEDs on full brightness)
  • 5VDC power requirement (do not exceed 6VDC) - no polarity protection
  • LED wavelengths: 630nm/530nm/475nm

Pin out:

With the longer pair of leads on the left, from left to right:

  • 1: DOUT
  • 2: GND
  • 3: 5V
  • 4: DIN

You may also be interested in the following product(s)

Digital RGB Addressable LED Weatherproof Strip 60 LED -1m

Digital RGB Addressable LED Weatherproof Strip 60 LED -1m

Incl. Tax: $26.87 Excl. Tax: $22.39 As low as: $21.50
Flora RGB Smart NeoPixel version 2 - Sheet of 20

Flora RGB Smart NeoPixel version 2 - Sheet of 20

Incl. Tax: $44.47 Excl. Tax: $37.06
NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix

NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix

Regular Price: $35.61

Special Price: Excl. Tax: $18.65 Incl. Tax: $22.37

NeoPixel 1/4 60 Ring - WS2812 5050 RGB LED w/ Integrated Drivers

NeoPixel 1/4 60 Ring - WS2812 5050 RGB LED w/ Integrated Drivers

Incl. Tax: $10.89 Excl. Tax: $9.08

Customer Reviews

Works with Arduino but NOT with Photon Review by Richard
Beware of these. Although both my Arduino and my Photon can control the pre-built neopixel strip, ONLY the Adrduino can control the individual LEDs. I've tried using a logic level converter and no joy. Must be super-sensitive.

Write Your Own Review

Only registered users can write reviews. Please, log in or register