1673 Seeed 103030031 Seeed NewCondition
Raspberry Pi Motor Board v1.0 top view diagonal

Raspberry Pi Motor Driver Board v1.0

52.91

Product Code : 1673

In Stock Now : 3
Incl. Tax: $67.72 Excl. Tax: $56.44
  • Raspberry Pi Motor Board v1.0 bottom view diagonal
  • Raspberry Pi Motor Board v1.0 top view
  • Raspberry Pi Motor Board v1.0 s circuit view
  • Raspberry Pi Motor Board v1.0 top view diagonal

Raspberry Pi Motor Driver Board v1.0 is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Raspberry Pi B/B+/A+ and Pi 2 Model B, controlling the speed and direction of each one independently.

The motor driver board is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up to 5.0A peak per single bridge, and supports a very wide range of input voltage from 6V~28V. The on board DC/DC converter can provide a 5V power supply for the Raspberry Pi with 1000mA maximum current, allowing for just one power supply to drive the motors and power up the Raspberry Pi.

  • Power interface: DC Jack
  • Dimensions: 91.20mm x 56.15mm
  • Operating Voltage: 6V ~ 28V
  • DC/DC output: 5V 1000mA @ "5V" pin
  • Output Current(For Each Channel ): 2A (continuous operation) / 5A(peak)
  • Output Duty Range: 0%~100%
  • Output short-circuit protection: Short to VPWR or GND
  • Over-current limiting: Regulation via internal constant-off-time PWM
  • Current limit threshold: 6V ~ 28V

You may also be interested in the following product(s)

Raspberry Pi Relay Board v1.0

Raspberry Pi Relay Board v1.0

Incl. Tax: $33.57 Excl. Tax: $27.98
Raspberry Pi 3 GPIO Shrouded Header (2x20)

Raspberry Pi 3 GPIO Shrouded Header (2x20)

Incl. Tax: $0.91 Excl. Tax: $0.76 As low as: $0.64
   

Write Your Own Review

Only registered users can write reviews. Please, log in or register