861 Arduino A000065 Arduino NewCondition
Wireless SD Shield

Wireless SD Shield

19.08

Product Code : 861

In Stock Now : 9
Incl. Tax: $24.42 Excl. Tax: $20.35

The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad.

Included on board is a SD card slot. When using the SD Library to access the card, Pin 4 is CS and cannot be used otherwise. SPI also relies on pins 11, 12, and 13 for communication.

Also on board is a switch allowing for control via USB or the microcontroller.

Schematic

EAGLE files: arduino_WirelessShield_SD_v3-reference-design.zip

Schematic: arduino_WirelessShield_SD_v3-schematic.pdf

You may also be interested in the following product(s)

Arduino Uno - R3

Arduino Uno - R3

Incl. Tax: $33.79 Excl. Tax: $28.16 As low as: $27.03
XBee 2mW Module with PCB Antenna (Series ZB)

XBee 2mW Module with PCB Antenna (Series ZB)

Incl. Tax: $26.88 Excl. Tax: $22.40 As low as: $21.50
   

Write Your Own Review

Only registered users can write reviews. Please, log in or register