1514 Makeblock 90014 Makeblock NewCondition
XY Plotter Robot Kit V2.0

XY Plotter Robot Kit V2.0

299.99

Product Code : 1514

In stock : 1
Incl. Tax: £299.99 Excl. Tax: £249.99

This is a complete kit, of hardware and electronics, to build an XY plotter. The Makeblock beams provide a straight and rigid structure that you can attach all of the required stepper motors, guide rods, pulleys and timing belts and can be constructed in a few hours without any cutting, drilling or tapping!

An Arduino compatible MeBaseboard, stepper motor drivers and micro switches are all included, You don't need any other supporting electronics to complete it. The included power supply is a US two pin plug, if you do not have an adaptor you will need to use a 12V power supply that can provide at least 2A.

A simple servo Z-axis is included so that you can mount a pen and create a drawing plotter, but you aren't limited to just a pen! You could mount a laser diode and have a small laser engraver/cutter, the frame is even strong enough for you to mount a larger Z-axis and create a light CNC mill!

Specification:

  • Frame: Anodized aluminum
  • Physical Dimensions(L×W×H): 620mm × 620mm×140mm
  • Working area (X×Y): 310mm×390mm
  • XY Accuracy: 0.1mm
  • Max Engrave Speed: 50mm/s
  • Power: 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A
  • Software: GRemote
  • Supports file type: *.CNC(G-code)
  • Connections: USB
  • Electronics: Makeblock Me_baseboard
1 x Beam 0824-16 10 x Shaft Collar 4mm 1 x 6P6C RJ25 cable-35cm
4 x Beam 0824-48 1 x Flexible coupling 4x4mm 2 x 6P6C RJ25 cable-50cm
1 x Beam 0824-80 4 x Linear Motion Shaft D8X496mm 1 x Wall Adapter Power Supply - 12VDC
4 x Beam 0824-96 6 x Linear Motion Slide Unit 8mm 1 x USB A-Male to B-Male Cable
2 x Beam 0824-112 10 x Flange Bearing 4x8x3mm 1 x Base Bracket
2 x Beam 0824-496 1 x HEX Screwdriver 2.5mm 4 x  Me Micro Switch B
1 x Beam 0808-80 1 x Cross Screwdriver 3mm 1 x 9g  micro servo bracket
2 x Beam2424-504 2 x HEX Allen Key 1.5mm 1 x Linear Motion Shaft D4x512mm
2 x Bracket 3x3 1 x Wrench 7mm 1 x Linear Motion Shaft D4x80mm
5 x Plate 3x6 50 x Nut M4 3 x Nut M2
5 x Bracket U1 10 x Countersunk Screw M3x8  3 x Cross recessed pan head screw M2×10
3 x  Belt Connector 26 x Headless Set Screw M3x5  30 x Socket Cap Screw M4×14
2 x 42BYG Stepper Motor Bracket 16 x Plastic Rivet R4060 28 x Socket Cap Screw M4×16
1 x K-Power 9g Micro Servo 6 x Plastic Rivet R4100 12 x Socket Cap Screw M4×22
2 x 42BYG Stepper Motor 20 x Plastic Ring 4x7x2mm 18 x Socket Cap Screw M4×30
6 x Timing Pulley18T 1 x Me-Orion Board 36 x Socket Cap Screw M4×8
3 x Open-end Timing Belt (1.3m) 2 x Me Stepper motor driver V1.0 6 x Cuttable Linkage 3
2 x D Shaft 4x56mm 3 x RJ25 Adapter 30 x Nylon cable ties 2*100
1 x Threaded Shaft 4x39mm 2 x 6P6C RJ25 cable-20cm 5 x Rubber band

You may also be interested in the following product(s)

Laser Engraver Upgrade Pack(500mW) for XY Plotter Robot Kit V2.0

Laser Engraver Upgrade Pack(500mW) for XY Plotter Robot Kit V2.0

Incl. Tax: £102.00 Excl. Tax: £85.00
     

Write Your Own Review

Only registered users can write reviews. Please, log in or register